We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White bullet camera with varifocal lens, 2.1 MP analog, 12 V DC power

Vitek

Vitek VTC-THB2RMS 2.1 MP varifocal analog camera

SKU CH-3BZT-VQ0JW

A 2.1 MP varifocal bullet camera with a 2.8 to 12 mm lens, 12 V DC power and IR illumination up to 480 mA for low-light surveillance

  • 1 MP resolution captures detailed 1920 x 1080 footage
  • Varifocal 2.8–12 mm lens adjusts field of view
  • Infrared illumination reaches 16 metres in darkness
  • 12 V DC power draws 120 mA with IR off
  • Signal-to-noise ratio above 52 dB reduces image noise

Vitek VTC-THB2RMS 2.1 MP Varifocal Bullet Camera

The Vitek VTC-THB2RMS is a 2.1 MP analog bullet camera built for outdoor or indoor surveillance. It uses a 1/2.8 CMOS sensor to deliver 1920 x 1080 resolution with progressive scanning. The varifocal lens adjusts from 2.8 to 12 mm to cover wide or narrow fields of view. Minimum illumination is rated at 0 lux with IR active, suited for sites needing reliable night coverage.

Installation Notes and Common Issues

The camera operates on 12 V DC and draws 120 mA with IR off or 480 mA with IR on; a suitable power supply is not included. Mounting options include ceiling, surface or wall brackets using the supplied hardware. The 8 5/8 inch body length and 3 7/16 inch diameter require adequate clearance at the mounting point. Ensure cable entries are sealed against moisture to prevent water ingress.

Pre-Order Compatibility Checks

Verify that your DVR or recorder supports analog 2.1 MP signal input at 1920 x 1080 resolution. Confirm the recorder provides 12 V DC power or budget for a separate 12 V supply rated for at least 480 mA per camera. Check that the existing cabling can carry the required current over the installed distance. The signal-to-noise ratio exceeds 52 dB, so ensure the recorder input matches this performance level.

Highlights

  • 1 MP resolution captures detailed 1920 x 1080 footage
  • Varifocal 2.8–12 mm lens adjusts field of view
  • Infrared illumination reaches 16 metres in darkness
  • 12 V DC power draws 120 mA with IR off
  • Signal-to-noise ratio above 52 dB reduces image noise

Specifications

BrandVITEK

Questions about this item

How do I confirm the 2.1 MP sensor is capturing 1920 x 1080 video after installation?

View the live feed on your DVR or monitor and verify the on-screen resolution reads 1920 (H) x 1080 (V) pixels with progressive scanning active.

The camera ships without a 12 V DC power supply; what must I purchase separately?

You need a 12 V DC adapter rated for at least 480 mA to cover the 480 mA draw when the IR LEDs are on.

Which focal-length setting suits a wide driveway versus a narrow hallway?

Use the 2.8 mm end for a wide driveway view and slide toward 12 mm for a narrow hallway or distant detail.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.