We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight stainless steel press-fit adapter with male NPT thread

Viega

Viega 95235 Stainless 304 Press-fit 3/4 in MNPT 1/2 in Adapter

SKU CH-XY2D-CMF8X

Stainless 304 press-fit adapter joins 3/4 in pipe to 1/2 in MNPT for non-potable water up to 200 psi and 250 °F

  • Stainless 304 construction resists corrosion in non-potable systems
  • Press-fit by 3/4 in MNPT adapter joins dissimilar pipe sizes fast
  • FKM O-ring seals reliably up to 250 Degrees F operating temperature
  • Rated for 200 psi maximum pressure in demanding applications
  • 2 21/32 in overall length fits tight installation spaces

3/4 in Press-Fit to 1/2 in MNPT Adapter

The Viega 95235 is a straight adapter made from 304 stainless steel. It connects a 3/4 in press-fit pipe to a 1/2 in male NPT thread. FKM O-rings seal the press connection. The fitting handles non-potable water systems.

Suitable for non-potable water piping up to 200

Installers needing a direct press-to-thread transition in stainless systems will use this. It is not for potable water lines. Buyers who require a different thread size or a potable-rated fitting should look elsewhere.

No bundled accessories or software included

The product is a single metal fitting supplied ready for pressing. No additional seals, tools or lubricants are packaged with it. The FKM O-ring is factory-fitted inside the press end.

Highlights

  • Stainless 304 construction resists corrosion in non-potable systems
  • Press-fit by 3/4 in MNPT adapter joins dissimilar pipe sizes fast
  • FKM O-ring seals reliably up to 250 Degrees F operating temperature
  • Rated for 200 psi maximum pressure in demanding applications
  • 2 21/32 in overall length fits tight installation spaces

Specifications

BrandViega Megapress Stainless 304

Questions about this item

Do I need a Viega press tool with the correct jaw for the 3/4 in press-fit end?

Yes, the 3/4 in press-fit connection requires a compatible Viega press tool and jaw to form a secure joint.

Can the FKM O-ring handle the 250 Degrees F maximum temperature if I reuse existing hot-water lines?

The FKM O-ring is rated for the fitting's 250 Degrees F maximum operating temperature, so it will withstand typical hot-water service.

After pressing, how do I verify the 200 psi seal is holding?

Pressurize the system to its working pressure and inspect the adapter for leaks; a proper press joint will hold 200 psi without weeping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.