We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black power adapter with 70 inch cord and 2.1 mm jack

VideoSecu

VideoSecu PW2000RS-N1 12V 2A Surveillance Accessory

SKU CH-KTF3-7D8RS

Regulated 12V 2A power supply with 70-inch cord and 2.1mm jack for high-power IR cameras, UL listed

  • TypeOther
  • Specifications•Input: AC 100V-240V; 50-60Hz; 0.8A • Output: DC 12V 2A (200
  • Features•2000mA fully regulated switching power supply •Great for hi
  • Package Contents1x Power Supply
  • Powers high-current IR cameras with 2000 mA regulated output
  • Accepts worldwide mains voltage from 100 V to 240 V
  • 70 inch cord with centre-positive 2.1 mm jack fits common CCTV gear
  • UL listed for USA and Canada safety compliance
  • Built-in overload and short-circuit protection keeps cameras running safely

12V 2A regulated power supply for IR cameras

This 12V DC 2A switching adapter delivers 2000mA of fully regulated power for high-power IR security cameras. It accepts AC 100V-240V at 50-60Hz with a 0.8A input draw. The unit carries UL safety compliance for the USA and Canada. Its lightweight design keeps power consumption low.

Simple two-prong input and 70 inch output lead

The non-polarised two-prong plug connects directly to a mains socket without a ground pin. A 70 inch output cord terminates in a 5.5 mm outer diameter, 2.1 mm inner diameter coaxial plug wired centre-positive. Built-in protection guards against output overload and short circuit. Ensure the jack orientation matches the camera before applying power.

Check camera voltage, current draw and connector fit

Verify the camera requires exactly 12V DC and draws no more than 2A. Confirm the device uses a 5.5 mm by 2.1 mm centre-positive barrel jack. The 70 inch cable length may limit placement distance from the mains outlet. This supply is not suited for cameras needing higher voltage, higher current or a different connector type.

Highlights

  • Powers high-current IR cameras with 2000 mA regulated output
  • Accepts worldwide mains voltage from 100 V to 240 V
  • 70 inch cord with centre-positive 2.1 mm jack fits common CCTV gear
  • UL listed for USA and Canada safety compliance
  • Built-in overload and short-circuit protection keeps cameras running safely

Specifications

BrandVideoSecu
ModelPW2000RS-N1
TypeOther
Specifications•Input: AC 100V-240V; 50-60Hz; 0.8A • Output: DC 12V 2A (2000mA) • 70 inch cord with center positive 2.1 mm jack •Safety Compliance: UL
Features•2000mA fully regulated switching power supply •Great for high power IR camera •Fully protected against output overload or short circuit •Light Weight and Low Power Consumptions
Package Contents1x Power Supply

Questions about this item

How can I confirm the adapter is delivering 12 V DC after I plug it in?

Measure the output with a multimeter set to DC volts; a reading near 12 V at the 2.1 mm centre-positive jack shows the regulated supply is working.

What comes in the box and what else do I need to connect a camera?

The package includes one power supply with a 70 inch cord and 5.5 mm OD / 2.1 mm ID coaxial plug; you only need a camera that accepts a 12 V DC 2 A centre-positive connection.

Which version should I choose for a high-power IR camera drawing up to 2 A?

The PW2000RS-N1 provides 12 V DC at 2000 mA with overload and short-circuit protection, matching the camera's requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.