We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black power supply with four 2.1mm DC output cables

VideoSecu

VideoSecu PW154 4-Channel 12V 2A Power Supply surveillance accessory

SKU CH-SJ9D-YQ4PQ

Supplies 12 V DC at 2 A across four 2.1 mm connectors for up to four CCTV cameras

  • TypePower Supply
  • Specifications• 12V DC Power Supply for 4 CCTV Cameras
  • Features• Input: AC 100V-240V 0.25A MAX • Output: DC 12V 2A (2000mA)
  • Package Contents1x 4CH Power Supply
  • Powers four cameras from one compact unit
  • Works worldwide with 100-240V AC input
  • Delivers stable 12V DC at 2000mA output
  • Includes four 2.1mm connectors for quick setup
  • Switch-mode regulation keeps voltage steady for CCTV systems

4-Channel 12V Power Supply

The VideoSecu PW154 delivers 12V DC at 2A across four 2.1mm connectors. It accepts AC input from 100V to 240V at a maximum of 0.25A. This unit powers up to four compatible CCTV cameras from a single outlet. The compact switch-mode design suits indoor surveillance installations.

Replaces Multiple Single Adapters

One PW154 replaces four individual camera power bricks, reducing cable clutter and outlet usage. The jump is worth it when you run several 12V cameras in the same zone and want a tidy, centralised power point. It does not suit setups that need more than four outputs or cameras requiring higher per-channel current.

Limited by 2A Total Output

The 2A total capacity is shared across all four ports, so each camera receives a fraction of that budget. Long cable runs add voltage drop, further reducing available power at the camera end. The 2.1mm plug standard fits many but not all 12V devices; verify connector polarity before connecting. The unit lacks battery backup, so cameras lose power during mains outages.

Highlights

  • Powers four cameras from one compact unit
  • Works worldwide with 100-240V AC input
  • Delivers stable 12V DC at 2000mA output
  • Includes four 2.1mm connectors for quick setup
  • Switch-mode regulation keeps voltage steady for CCTV systems

Specifications

BrandVideoSecu
ModelPW154
TypePower Supply
Specifications• 12V DC Power Supply for 4 CCTV Cameras
Features• Input: AC 100V-240V 0.25A MAX • Output: DC 12V 2A (2000mA) • 4 of 2.1mm DC connectors
Package Contents1x 4CH Power Supply

Questions about this item

What size DC plug do the four camera outputs use?

Each of the four outputs has a 2.1mm centre-positive barrel connector that fits standard 12V CCTV camera power leads.

Does the unit need any configuration before I plug in the cameras?

No configuration is required; connect the AC cord to a 100V-240V mains socket, then attach each camera to one of the four 2.1mm DC plugs.

What should I check if a camera stops receiving power after several months?

Verify the 2.1mm plug is fully seated, inspect the cable for damage, and confirm the total draw of all connected cameras stays within the 2A (2000mA) output limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.