Jedrek WG26/34 Wiegand to RS485 Bidirectional Converter security
- Keyless Entry System
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
VideoSecu
Four pre-terminated 50 ft BNC cables with a 4-channel power supply carry video and DC power to CCTV cameras in a single run
The VideoSecu CBV54P kit supplies four pre-terminated 50ft cables that carry both video and DC power to analogue security cameras. Each cable ends in a BNC male video connector and a 2.1mm centre-positive power plug. The bundle includes a four-channel power supply and BNC-to-RCA adapters for direct connection to monitors or recorders.
A single 4CH power supply drives all four cameras from one mains outlet, removing the need for individual wall adapters at each camera location. The included BNC-to-RCA adapters let you plug cameras straight into composite video inputs on TVs, monitors or DVRs without extra converters. Cables are ready to use with no crimping or soldering required.
Installation is straightforward: run each 50ft cable, connect the BNC end to the recorder and the power plug to the camera, then power the supply unit. The cables support standard analogue CCTV cameras only; they will not work with SDI or HD cameras that require different signalling or power schemes. Pure copper conductors maintain signal quality over the full length.
| Brand | VideoSecu |
|---|---|
| Model | CBV54P |
| Type | Video & Power Cable |
| Specifications | • 50ft video and power cable in black • For camera with DC power only • Video Connection: BNC male • Power Connection: 2.1mm center positive power plug |
| Features | • Used with Closed Circuit Television (CCTV) applications and security camera components • The pre-terminated CCTV cable simplify the installation of security systems, use one cable to transmit video and power |
| Package Contents | 4x 50ft cable, 1x 4CH Power Suply and Free BNC RCA adapters |
The 2.1mm center-positive plugs are pre-terminated and intended for DC-powered cameras; inspect them periodically for corrosion or loose fit and replace any that show wear.
Each cable is 50ft long; for standard analogue CCTV this distance typically stays within acceptable attenuation limits, but very long runs beyond this may require a video amplifier.
The included 4CH power supply has no fan and operates silently; it will warm up under full load, so mount it in a ventilated area to dissipate heat.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?