We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VideoSecu

VideoSecu CBV506 6-pack 50ft BNC RCA video power cable

SKU CH-14GT-CE926

Six pre-terminated 50 ft cables carry video and DC power over BNC and 2.1 mm plugs for CCTV cameras

  • TypeVideo & Power Cable
  • Specifications• 50ft video and power cable in black • For camera with DC p
  • Features• Used with Closed Circuit Television (CCTV) applications an
  • Package Contents6x 50ft cable and Free BNC RCA adapters
  • All-in-one cable carries video and power over 50ft
  • Pre-terminated BNC male and 2.1mm plug enable plug-and-play setup
  • Pure copper conductors deliver clear signal for CCTV systems
  • Six cables included with free BNC-to-RCA adapters for flexible connections
  • Designed for DC-powered cameras, not SDI or HD models

Ready-to-install CCTV extension cables

This pack contains six 50ft cables that combine video and DC power in a single black jacket. Each cable arrives pre-terminated with a BNC male connector for video and a 2.1mm centre-positive plug for power. The pure-copper conductors transmit both signals without the need for separate runs. Supplied BNC-to-RCA adapters allow direct connection to monitors or DVRs that use RCA inputs.

Installers who need longer runs without splicing

The cables suit installers extending analogue or HD-over-coax cameras that draw DC power through a 2.1mm jack. They will not work with SDI cameras or with cameras that require a different power connector or voltage. Builders needing longer individual runs or a different power-plug style should look at other options.

Single-cable video and 2.1mm DC power

The defining specification is the combined BNC video and 2.1mm centre-positive power interface on a 50ft length. If your cameras use that exact power plug and BNC video, the cable fits; if they use a different power jack or SDI signalling, it will not.

Highlights

  • All-in-one cable carries video and power over 50ft
  • Pre-terminated BNC male and 2.1mm plug enable plug-and-play setup
  • Pure copper conductors deliver clear signal for CCTV systems
  • Six cables included with free BNC-to-RCA adapters for flexible connections
  • Designed for DC-powered cameras, not SDI or HD models

Specifications

BrandVideoSecu
ModelCBV506
TypeVideo & Power Cable
Specifications• 50ft video and power cable in black • For camera with DC power only • Video Connection: BNC male • Power Connection: 2.1mm center positive power plug
Features• Used with Closed Circuit Television (CCTV) applications and security camera components • The pre-terminated CCTV cable simplify the installation of security systems, use one cable to transmit video and power
Package Contents6x 50ft cable and Free BNC RCA adapters

Questions about this item

What video interface does the BNC male connector use and what resolution does it cap at?

The BNC male connector carries analogue composite video; it does not support SDI or HD cameras so the practical limit is standard-definition CCTV signals.

What physical clearance and connectors are required to mount each 50ft cable?

Each cable ends in a BNC male video plug and a 2.1mm centre-positive power plug, so the camera needs a matching BNC female jack and a 2.1mm DC socket within 50ft of the DVR or monitor.

How do I install the cables and what step is commonly missed?

Connect the BNC male to the camera video out and the 2.1mm plug to its DC power in, then run the single 50ft cable to the DVR or monitor; the step often missed is confirming the camera uses DC power only and is not an SDI or HD model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.