Jedrek WG26/34 Wiegand to RS485 Bidirectional Converter security
- Keyless Entry System
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
VideoSecu
Two 50ft pre-terminated cables carry video via BNC male and power via 2.1mm centre-positive plugs, each supplied with a 12V 500mA adapter for DC cameras
This pack contains two pre-terminated 50ft cables that carry both video and DC power in a single run. Each cable ends in a BNC male video connector and a 2.1mm centre-positive power plug. Two 12V 500mA power supplies are included along with BNC-to-RCA adapters for alternative display inputs. The cables are intended for standard CCTV cameras that accept DC power only.
The BNC male video connection is designed for analogue CCTV signals and will not support SDI or HD camera formats. The 2.1mm centre-positive power plug delivers 12V at 500mA, so cameras drawing more current than this cannot be powered reliably. Combined video and power transmission is limited to the 50ft length supplied; extending further would require additional equipment not provided.
Verify that each camera uses a DC input with a 2.1mm centre-positive jack before ordering. Cameras requiring AC power, SDI video or higher current than 500mA are not compatible with this kit. Ensure the DVR or monitor accepts BNC video or can use the supplied RCA adapters. No other tools or cables are needed for a standard plug-and-play installation.
| Brand | VideoSecu |
|---|---|
| Model | CBV502P |
| Type | Video & Power Cable |
| Specifications | • 50ft video and power cable in black • For camera with DC power only • Video Connection: BNC male • Power Connection: 2.1mm center positive power plug |
| Features | • Used with Closed Circuit Television (CCTV) applications and security camera components • The pre-terminated CCTV cable simplify the installation of security systems, use one cable to transmit video and power |
| Package Contents | 2x 50ft cable, 2x Power Supply and Free BNC RCA adapters |
This pack contains two 50ft cables with power supplies and BNC RCA adapters, suited for cameras needing DC power over that distance.
The 12V 500mA supplies deliver up to 6W, enough for typical analog CCTV cameras but not for higher-draw PTZ or IR models.
The cable carries composite video via BNC and DC power via 2.1mm center-positive plugs, so it works with standard analog cameras and DVRs only.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?