Jedrek WG26/34 Wiegand to RS485 Bidirectional Converter security
- Keyless Entry System
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
VideoSecu
Ten 100 ft cables carry video and DC power for HD analog cameras with BNC and 2.1 mm plugs
This kit supplies ten pre-made 100ft cables that carry both video and DC power for analog security cameras. Each cable uses pure copper conductors and terminates in a BNC male video connector plus a 2.1mm centre-positive power plug. The bundle also includes BNC-to-RCA adapters for flexible device connections. All components are new and ready for immediate installation.
The cables support HD 960P and 720P formats as well as 700TVL and 1000TVL resolution cameras, so they suit most modern analog surveillance systems. Builders who need longer runs beyond 100ft or who require IP network cameras with PoE should look at different cabling solutions. The 2.1mm power plug fits cameras with that specific DC jack only.
This connector pair is the sole specification that decides whether the cable matches a camera. The video end plugs directly into a BNC female port on the recorder or camera, while the power end mates with a 2.1mm centre-positive DC socket. Cameras using screw-terminal power inputs or a different barrel size cannot be powered by this kit.
| Brand | VideoSecu |
|---|---|
| Model | CBV10010 |
| Type | Video & Power Cable |
| Specifications | •Video Connection: BNC male•Power Connection: 2.1mm center positive power plug•Be made of pure copper and good quality |
| Features | •All-in-one 100ft video and power cable support HD 960P/720P, AHD, CVI, TVI HD Analog security camera•Easily connect to 960H 700TVL 1000TVL security camera•Transmit video signals and supply DC power for security camera•For camera with DC power only |
| Package Contents | 10x 100ft Cable and Free BNC RCA adapters |
The pack contains ten 100ft cables with BNC male video ends and 2.1mm centre-positive power plugs, so one box covers up to ten camera drops.
It carries analogue HD signals such as AHD, CVI and TVI at up to 960P resolution while simultaneously delivering DC power to the camera.
BNC male plugs connect directly to camera and DVR BNC ports; the included RCA adapters let you join RCA sockets, but the cable still carries only composite video and low-voltage DC power.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?