We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four coiled black cables with BNC and power connectors

VideoSecu

VideoSecu CBHD504 4×50 ft Video & Power Cable Kit

SKU CH-0ZAA-WPDR8

Four 50 ft all-in-one cables carry video and DC power to HD analog cameras with BNC and 2.1 mm connectors

  • TypeVideo & Power Cable
  • Specifications•Video Connection: BNC male•Power Connection: 2.1mm center p
  • Features•All-in-one 50ft video and power cable support HD 960P/720P,
  • Package Contents4x 50ft Cable and Free BNC RCA Connectors
  • All-in-one cable carries video and power over 50 ft
  • Pure copper conductors deliver reliable signal transmission
  • BNC male and 2.1 mm power plugs fit standard CCTV gear
  • Supports HD 960P, 720P, AHD, CVI and TVI formats
  • Includes four cables plus free BNC-to-RCA adapters

Ready-to-install surveillance cable kit

This VideoSecu CBHD504 kit supplies four pre-made 50 ft cables that carry both video and DC power in a single run. Each cable uses pure copper conductors and terminates in a BNC male video connector plus a 2.1 mm centre-positive power plug. The all-in-one design simplifies wiring for CCTV, AHD, CVI and TVI analogue cameras up to 960P resolution.

Check camera power and connector type

Verify that every camera you plan to connect accepts a 2.1 mm centre-positive DC power input and a BNC video input. The included RCA-to-BNC adapters allow conversion where a camera or DVR provides an RCA socket instead of BNC. Ensure the 50 ft length reaches from each camera location to the recorder or power supply without excess slack that could degrade signal quality.

Replaces separate video and power runs

Installers who currently pull individual coaxial and power cables can consolidate to one cable per camera, reducing labour and conduit fill. The upgrade is worthwhile when extending existing 700 TVL, 960H or 1000 TVL analogue installations to 720P or 960P HD formats without rewiring the entire site. It does not suit IP cameras or any device requiring network cabling or PoE.

Highlights

  • All-in-one cable carries video and power over 50 ft
  • Pure copper conductors deliver reliable signal transmission
  • BNC male and 2.1 mm power plugs fit standard CCTV gear
  • Supports HD 960P, 720P, AHD, CVI and TVI formats
  • Includes four cables plus free BNC-to-RCA adapters

Specifications

BrandVideoSecu
ModelCBHD504
TypeVideo & Power Cable
Specifications•Video Connection: BNC male•Power Connection: 2.1mm center positive power plug•Be made of pure copper and good quality
Features•All-in-one 50ft video and power cable support HD 960P/720P, AHD, CVI, TVI HD Analog security camera•Easily connect to 960H 700TVL 1000TVL security camera•Transmit video signals and supply DC power for security camera•For camera with DC power only
Package Contents4x 50ft Cable and Free BNC RCA Connectors

Questions about this item

What cables and connectors are included in the 4-pack kit?

The kit contains four 50ft all-in-one cables with BNC male video ends and 2.1mm centre-positive power plugs, plus two free BNC-to-RCA adapters.

Which cable version suits a 960P AHD camera versus a 700TVL analogue camera?

The same 50ft cable supports both; it is rated for HD 960P/720P AHD, CVI, TVI and also connects to 960H, 700TVL and 1000TVL analogue cameras.

How far can the 50ft cable run carry both video and DC power without extra equipment?

The 50ft length is the maximum single-cable run supplied; it transmits video and delivers DC power to the camera in one plug-and-play connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.