We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VideoSecu

VideoSecu CBHD5016 16 Pack 50ft BNC Video Power Cable

SKU CH-W5TZ-0JC2A

A 16-pack of 50ft BNC cables that carry video and DC power to AHD, CVI, TVI and analogue cameras using pure-copper conductors and 2.1mm plugs

  • TypeVideo & Power Cable
  • Specifications•Video Connection: BNC male•Power Connection: 2.1mm center p
  • Features•All-in-one 50ft video and power cable support HD 960P/720P,
  • Package Contents16x 50ft Cable and Free BNC RCA Connectors
  • All-in-one cable carries 720P and 960P video plus DC power
  • Pure copper conductors transmit signals cleanly over 50ft runs
  • BNC male and 2.1mm power plugs connect cameras without adapters
  • Plug-and-play design speeds up 16-camera system installs
  • Free RCA/BNC adapters add flexibility for 700TVL and 1000TVL devices

Pack contents and purpose

This pack contains 16 pre-made cables each 50 feet long for analogue CCTV cameras. Each cable carries video and DC power in a single run with BNC male video plugs and 2.1mm centre-positive power connectors. Pure copper conductors are used throughout for reliable signal transmission. The kit suits installers wiring multiple cameras to a DVR in one project.

Supported resolutions and distance limit

The cables support HD analogue formats including 960P, 720P, AHD, CVI and TVI as well as 960H and cameras rated to 700TVL or 1000TVL. At 50 feet per cable the length covers typical indoor and short outdoor runs without extra joiners. Longer distances would require additional cable or a different transmission method.

Upgrade path and when to choose this

The all-in-one design replaces separate coaxial video leads and low-voltage power wires, cutting installation time on multi-camera sites. It is a direct substitute for Siamese cable assemblies when pre-terminated BNC and 2.1mm plugs are preferred. Buyers who need longer individual runs or fibre-based transmission should consider other solutions.

Highlights

  • All-in-one cable carries 720P and 960P video plus DC power
  • Pure copper conductors transmit signals cleanly over 50ft runs
  • BNC male and 2.1mm power plugs connect cameras without adapters
  • Plug-and-play design speeds up 16-camera system installs
  • Free RCA/BNC adapters add flexibility for 700TVL and 1000TVL devices

Specifications

BrandVideoSecu
ModelCBHD5016
TypeVideo & Power Cable
Specifications•Video Connection: BNC male•Power Connection: 2.1mm center positive power plug•Be made of pure copper and good quality
Features•All-in-one 50ft video and power cable support HD 960P/720P, AHD, CVI, TVI HD Analog security camera•Easily connect to 960H 700TVL 1000TVL security camera•Transmit video signals and supply DC power for security camera•For camera with DC power only
Package Contents16x 50ft Cable and Free BNC RCA Connectors

Questions about this item

Will these 50ft cables work with my existing 700TVL analogue cameras?

Yes, the cables support 960H 700TVL and 1000TVL cameras, so your current units will connect directly via the BNC male plugs.

How can I verify the video and power are passing correctly after I run the cables?

Check that the DVR displays a clear picture from each channel and that the camera LEDs illuminate, confirming both the BNC video path and the 2.1mm centre-positive power feed are live.

What exactly ships in the 16-pack and do I need any extra connectors?

The box contains sixteen 50ft all-in-one cables plus two free RCA-to-BNC adapters; no additional connectors are required for standard BNC or 2.1mm DC camera ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.