We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VideoSecu

VideoSecu CBHD10016 16 Pack 100ft Video Power Extension Cable

SKU CH-FNF1-6N7VP

Sixteen pre-made 100-foot cables carry video and DC power for HD analog cameras

  • TypeVideo & Power Cable
  • Specifications•Video Connection: BNC male•Power Connection: 2.1mm center p
  • Features•All-in-one 100ft video and power cable support HD 960P/720P
  • Package Contents16x 100ft Cable and Free BNC RCA Connectors
  • All-in-one 100ft cable carries video and DC power together
  • Pure copper conductors deliver clear 960P and 720P signals
  • BNC male and 2.1mm plug fit AHD CVI TVI analog cameras
  • Supports 700TVL 1000TVL resolution cameras with plug-and-play ease
  • 16 pack with free BNC RCA adapters simplifies multi-camera installs

16-pack surveillance cable kit

This kit contains sixteen pre-made 100ft cables that combine video and DC power in a single run. Each cable uses pure copper conductors to carry analogue video signals and supply power to compatible security cameras. The bulk pack suits installers wiring multiple cameras across a property or campus. The all-in-one design reduces the number of separate wires that must be pulled through walls or conduit.

BNC male video and 2.1mm centre-positive power plugs

Every cable terminates in a BNC male connector for the video feed and a 2.1mm centre-positive plug for the camera power input. This fixed connector set means the installer does not need to crimp or solder ends on site. The cables support HD 960P and 720P formats as well as AHD, CVI and TVI analogue standards. They also connect to 960H cameras rated at 700TVL and 1000TVL resolution.

Free BNC-to-RCA adapters included

The package supplies sixteen BNC-to-RCA adapters at no extra cost, allowing the video signal to plug into equipment that only accepts RCA phono inputs. This flexibility lets the same cables serve recorders or monitors with different connector types. No software or configuration is required; the cables are plug-and-play for cameras powered by DC sources only.

Highlights

  • All-in-one 100ft cable carries video and DC power together
  • Pure copper conductors deliver clear 960P and 720P signals
  • BNC male and 2.1mm plug fit AHD CVI TVI analog cameras
  • Supports 700TVL 1000TVL resolution cameras with plug-and-play ease
  • 16 pack with free BNC RCA adapters simplifies multi-camera installs

Specifications

BrandVideoSecu
ModelCBHD10016
TypeVideo & Power Cable
Specifications•Video Connection: BNC male•Power Connection: 2.1mm center positive power plug•Be made of pure copper and good quality
Features•All-in-one 100ft video and power cable support HD 960P/720P, AHD, CVI, TVI HD Analog security camera•Easily connect to 960H 700TVL 1000TVL security camera•Transmit video signals and supply DC power for security camera•For camera with DC power only
Package Contents16x 100ft Cable and Free BNC RCA Connectors

Questions about this item

What video resolution does the BNC connection on this CBHD10016 cable support?

The BNC male connectors carry analogue video up to 960P and 720P for AHD, CVI and TVI cameras.

What physical space is required to route each 100ft cable in this 16-pack?

Each cable is a single 100ft run combining video and power, so you need a continuous path of that length between camera and DVR.

How do I connect the 2.1mm power plug to a camera that uses a screw-terminal block?

Strip the cable ends and wire them to the terminal block; the included BNC-to-RCA adapters only convert the video connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.