We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled 100ft BNC video and power cable with male connectors and RCA adapters

VideoSecu

VideoSecu CBHD100 100ft BNC Video Power Cable surveillance accessory

SKU CH-PVK3-65KX0

A 100 ft all-in-one cable transmits video and supplies DC power to HD analog cameras with BNC male and 2.1 mm connectors

  • TypeVideo & Power Cable
  • Specifications•Video Connection: BNC male•Power Connection: 2.1mm center p
  • Features•All-in-one 100ft video and power cable support HD 960P/720P
  • Package Contents100ft Cable and Free BNC RCA Connectors
  • All-in-one 100ft cable carries video and DC power together
  • Pure copper conductors transmit video signals without quality loss
  • BNC male and 2.1mm power plug connect directly to cameras
  • Supports HD 960P, 720P, AHD, CVI and TVI analog cameras
  • Includes two RCA to BNC adapters for flexible hook-up

100ft All-in-One BNC Video Power Cable

This 100ft pre-made cable combines video and DC power in a single run for analog HD security cameras. It supports 960P and 720P resolutions across TVI, CVI and AHD formats. Pure copper conductors carry both signals. The cable terminates in BNC male for video and a 2.1mm centre-positive plug for power. Two RCA/BNC adapters are included.

Signal Integrity Over Long Runs

Pure copper construction helps maintain video quality across the full 100ft length for 960H, 700TVL and 1000TVL cameras. The combined jacket reduces the number of separate cables that must be routed. Voltage drop on the 2.1mm power line will increase with cable length and camera current draw. Installers should verify that the camera receives adequate voltage at the far end.

Plug-and-Play Installation

BNC male and 2.1mm power connectors attach directly to compatible cameras and DVRs without crimping tools. The included RCA/BNC adapters allow connection to equipment with RCA video inputs. This cable is designed for cameras that accept DC power only; it cannot be used with AC-powered units. Polarity of the 2.1mm plug is centre positive.

Highlights

  • All-in-one 100ft cable carries video and DC power together
  • Pure copper conductors transmit video signals without quality loss
  • BNC male and 2.1mm power plug connect directly to cameras
  • Supports HD 960P, 720P, AHD, CVI and TVI analog cameras
  • Includes two RCA to BNC adapters for flexible hook-up

Specifications

BrandVideoSecu
ModelCBHD100
TypeVideo & Power Cable
Specifications•Video Connection: BNC male•Power Connection: 2.1mm center positive power plug•Be made of pure copper and good quality
Features•All-in-one 100ft video and power cable support HD 960P/720P, AHD, CVI, TVI HD Analog security camera•Easily connect to 960H 700TVL 1000TVL security camera•Transmit video signals and supply DC power for security camera•For camera with DC power only
Package Contents100ft Cable and Free BNC RCA Connectors

Questions about this item

Will the 2.1 mm centre-positive power plug warm up when the cable runs all day?

The 100 ft cable uses pure copper conductors sized for typical CCTV power draw, so heat build-up at the 2.1 mm plug is minimal during continuous operation.

What must I already own to connect this cable to my recorder and camera?

You need a DVR or monitor with a BNC female input and a camera that accepts a 2.1 mm centre-positive DC power jack.

Can I use this cord with my older 960H or 700 TVL analogue cameras?

Yes, the BNC video connection and 2.1 mm power plug are compatible with 960H, 700 TVL and 1000 TVL analogue cameras.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.