Jedrek WG26/34 Wiegand to RS485 Bidirectional Converter security
- Keyless Entry System
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
VideoSecu
Two 50 ft pure-copper cables transmit audio, video and DC power via BNC, RCA and 2.1 mm plugs, with free BNC-to-RCA adapters included
The VideoSecu ACBVA502P delivers a 50 ft combined audio, video and DC power run for analogue CCTV cameras. Each pack contains two cables, two power supplies and free BNC-to-RCA adapters. The pure-copper conductors carry composite video through a BNC plug, mono audio through an RCA plug and 2.1 mm centre-positive power to the camera. Installers simply connect each end and power the supply — no soldering or crimping required.
Because the cable carries only low-voltage DC and baseband analogue signals, it generates no measurable heat and produces no fan or coil noise. Power draw is limited to the camera’s own consumption plus minimal resistive loss over the 50 ft length. The 2.1 mm barrel connector feeds the camera directly from the included supply, so there is no additional power brick at the camera end.
The black PVC jacket protects the pure-copper cores during indoor or sheltered outdoor pulls. BNC, RCA and 2.1 mm plugs are moulded for strain relief, and the bundled BNC-to-RCA adapters let the video feed connect to either BNC or RCA inputs on a DVR or monitor. The kit does not support SDI or HD cameras, so buyers needing digital or high-definition transmission should choose a different cable type.
| Brand | VideoSecu |
|---|---|
| Model | ACBVA502P |
| Type | Audio/Video & Power Cable |
| Specifications | •50ft audio video power cable in black •Be made of pure copper and of good quality •Transmit audio video signal and DC power for security camera. This cable will not support SDI camera and HD camera. |
| Features | •Connection: BNC video, RCA audio and 2.1 mm center positive power plugs •Free BNC to RCA connectors •Easily use, just plug and play |
| Package Contents | 2x 50ft Cable, 2x Power Supply and Free BNC RCA Adapters |
Plug the BNC end into the camera video port, the RCA into the audio input, and the 2.1 mm centre-positive plug into the camera power socket; the included BNC-to-RCA adapters let you match DVR inputs if needed.
The BNC and RCA connectors can loosen or corrode over time, and the 2.1 mm power plug may wear from repeated insertion; the pure copper conductors themselves rarely fail.
The cable does not support SDI or HD cameras, so signal quality degrades immediately if you connect a camera type outside standard analogue CCTV.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?