We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast-iron pneumatic vibrator, rectangular body, NPT ports, 10.2 in long, 7.24 in high, 5.43 in wide

Vibco

Vibco BVS-570 pneumatic vibrator 1050 lbf

SKU CH-CJRC-G4W5Q

Cast-iron turbine vibrator delivers 1,050 lbf at 3,600 vpm with 80 psi air supply

  • TypeVibrators
  • Delivers 1050 lbf force for heavy material flow
  • Turbine design runs continuously at 4000 vpm without lubrication
  • Consumes 26 cfm at 80 psi for efficient air use
  • Cast-iron housing withstands harsh industrial environments
  • Compact 10.2 in length fits tight mounting spaces

Industrial Pneumatic Vibrator for Bin Flow

The VIBCO BVS-570 is a cast-iron turbine vibrator that delivers a maximum force of 1050 lbf at up to 4000 vpm. It operates on compressed air at 80 psi with a continuous duty cycle. The unit mounts via a 3/4 in NPT inlet and a 1 in NPT outlet.

Suited for Hoppers Up to 10500 lb

This vibrator suits bins with a maximum weight capacity of 10500 lb where continuous operation is required. It is not for applications needing electric power or intermittent duty cycles. Buyers who require a lower sound level than 83 dBA should consider alternative solutions.

1050 lbf Maximum Force at 80 psi

The single specification that decides fit is the maximum force of 1050 lbf generated at 80 psi. Match this rating to the bin weight and material characteristics to confirm the vibrator can overcome friction and ensure reliable flow.

Highlights

  • Delivers 1050 lbf force for heavy material flow
  • Turbine design runs continuously at 4000 vpm without lubrication
  • Consumes 26 cfm at 80 psi for efficient air use
  • Cast-iron housing withstands harsh industrial environments
  • Compact 10.2 in length fits tight mounting spaces

Specifications

TypeVibrators

Questions about this item

What NPT inlet and outlet sizes does the BVS-570 require for piping?

The vibrator uses a 3/4 in NPT inlet and a 1 in NPT outlet for compressed-air connections.

How is the BVS-570 mounted, and what clearance is needed for the 10.2 in length?

Bolt the cast-iron housing through its base holes; allow at least 10.2 in linear clearance plus room for the 1 in NPT outlet fitting.

What ongoing maintenance does the turbine vibrator need at 80 psi continuous duty?

Supply clean, lubricated air at 80 psi; periodically check the muffler and inlet filter to maintain the 26 cfm flow and 83 dBA sound level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.