We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Leeson 096066.00 AC gearmotor, TEFC enclosure, parallel shaft, horizontal or vertical mount

Leeson

Leeson 096066.00 AC Gearmotor 29 rpm 208-230/460V 58:1

SKU CH-XH77-RBA1D

Three-phase AC gearmotor delivering 29 rpm output at 58:1 ratio with 300.0 in-lb torque

  • TypeGearing
  • Delivers 300.0 in-lb torque for heavy loads
  • Runs at 29 RPM with 58:1 reduction ratio
  • TEFC enclosure protects motor in harsh environments
  • Operates on 208-230/460V three-phase power
  • Handles 327 lb overhung load on output shaft

Leeson 096066.00 AC Gearmotor 29 rpm 208-230/460V

This Leeson AC gearmotor delivers 29 RPM output with a 58:1 reduction ratio. It operates on 208-230/460V three-phase power at 60 Hz with a 1/4 hp input rating. The parallel shaft design suits industrial machinery requiring consistent low-speed torque.

Installation requirements and common issues

The totally enclosed fan-cooled enclosure supports horizontal or vertical shaft-down mounting. Full-load current draws 1.2 amps at low voltage or 0.6 amps at 460V. No thermal protection is fitted, so external overload devices must be provided. Overhung load capacity is 327 lb; exceeding this risks bearing failure.

Sustained-load behaviour

Insulation Class F4 withstands continuous duty temperatures. The 300.0 in-lb maximum torque rating applies across the full speed range. Three-phase supply ensures smooth operation without single-phase pulsation. The gearmotor maintains rated output during extended runs when mounted per the specified orientations.

Highlights

  • Delivers 300.0 in-lb torque for heavy loads
  • Runs at 29 RPM with 58:1 reduction ratio
  • TEFC enclosure protects motor in harsh environments
  • Operates on 208-230/460V three-phase power
  • Handles 327 lb overhung load on output shaft

Specifications

TypeGearing

Questions about this item

How can I confirm the gearmotor is delivering the rated 300.0 in-lb of torque after installation?

Run the unit under load and verify the output shaft turns at 29 RPM while drawing no more than 1.2 amps at 230 V or 0.6 amps at 460 V, confirming the 58:1 ratio and nameplate performance.

What ships with the 096066.00 gearmotor and what must I source separately?

The gearmotor itself ships complete with its TEFC enclosure and parallel output shaft; you must supply the 208-230/460 V three-phase power feed, mounting hardware for horizontal or vertical shaft-down orientation, and any driven-equipment coupling.

Which voltage connection should I use for a 230 V three-phase supply?

Wire the motor for the low-voltage 208-230 V configuration; the nameplate shows 1.2 full-load amps at that voltage versus 0.6 amps on the 460 V high-voltage connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.