We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Heavy-duty steel frame dolly with four nylon casters two braked adjustable bunks for watercraft

VEVOR

VEVOR Watercraft PWC Dolly 1000 lbs 4 Casters 2 Brakes

SKU CH-JZE0-YRDB5

Heavy-duty steel cart moves watercraft up to 1000 lbs on four nylon casters, two with brakes, and adjustable bunks at 9, 11, 15 or 19 inches

  • TypeOther Appliances
  • Width12.8
  • Supports watercraft up to 1000 lbs with thickened 1.4 in steel frame
  • Four 4 in nylon wheels with carbon steel brackets and ball bearings for smooth rolling
  • Two swivel casters with brakes lock securely during trailer connection or storage
  • Adjustable bunk spacing at 9, 11, 15 and 19 in fits various hull shapes
  • Ships with all bolts, washers, nuts and wrenches for quick assembly

Heavy-Duty Jet Ski Cart for Watercraft Transport

The VEVOR watercraft dolly is a steel-framed cart rated at 1000 lbs load capacity, designed to move jet skis, kayaks, inflatable boats and sailboats across hard surfaces. Adjustable bunks offer four spacing options from 9 in to 19 in and a 20 in bunk height to suit various hull shapes. It ships new with all mounting hardware and an instruction manual for assembly.

Four Nylon Casters with Dual Brakes

Four 4 in diameter nylon wheels mounted on carbon steel brackets with ball bearings provide low rolling resistance on smooth ground. Two swivel casters include integrated brakes to lock the cart during trailer coupling or storage, preventing unwanted movement. The 1.4 in thickened tube diameter and I-beam base resist flex under full load, keeping the platform level without requiring oversized tyres or pneumatic suspension.

Upgrades from Fixed Bunk Trailers

This dolly replaces static launch cradles or single-axle trailers when manoeuvrability in tight marinas or driveway storage is the priority. The adjustable bunk angles accommodate V-hull and flat-bottom craft that fixed bunks cannot support securely. Buyers needing highway-speed towing, integrated winches or enclosed storage compartments should consider dedicated trailer platforms instead.

Highlights

  • Supports watercraft up to 1000 lbs with thickened 1.4 in steel frame
  • Four 4 in nylon wheels with carbon steel brackets and ball bearings for smooth rolling
  • Two swivel casters with brakes lock securely during trailer connection or storage
  • Adjustable bunk spacing at 9, 11, 15 and 19 in fits various hull shapes
  • Ships with all bolts, washers, nuts and wrenches for quick assembly

Specifications

TypeOther Appliances
Width12.8

Questions about this item

How do I assemble the dolly and which step is most often missed?

Bolt the two base U-tubes to the small U-tubes using the M10x90 and M10x60 bolts with washers and lock nuts, then attach the wheel connecting rods and four 4-inch casters — the step most often missed is tightening the M10 lock nuts to the specified torque so the frame does not shift under load.

What parts will need inspection or replacement after repeated use?

Check the nylon wheels, carbon steel brackets and ball bearings for wear; the M8 and M10 lock nuts can loosen over time and should be re-torqued, while the galvanized bolts may need replacement if corrosion appears on the threads.

At what point does the dolly reach its limit during sustained use?

The 1000 lbs load capacity is the first limit — exceeding it risks deformation of the 1.4-inch thickened steel tubes and over-stresses the 4-inch diameter wheels and I-beam base.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.