We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal ultrasonic cleaner with six vertical test cylinders on top, grey finish, control panel on front

VEVOR

VEVOR VT180 6-Cylinder 28kHz Ultrasonic Fuel Injector Cleaner Tester

SKU CH-RD1A-E3KSE

Tests and cleans six injectors simultaneously using 28kHz ultrasonic power with adjustable 12V, 70V and 120V outputs

  • TypeOther Appliances
  • Cleans six injectors simultaneously with 28kHz ultrasonic power
  • Tests EFI GDI and FSI injectors at adjustable 12V 70V 120V
  • Nine selectable modes cover pulse width from 0 to 20.0 ms
  • Large 2000 ml tank holds 67.6 fl oz of cleaning solution
  • Compact 14.57 by 14.57 by 15.94 inch footprint fits workshop bench

VEVOR VT180 6-Cylinder Ultrasonic Injector Tester

The VEVOR VT180 is a bench-top ultrasonic cleaner and tester designed for automotive workshops and serious DIY mechanics. It handles up to six injectors simultaneously using a 28 kHz ultrasonic frequency and 70 W cleaning power. The unit supports EFI, GDI and FSI injector types with adjustable DC operating voltages of 12 V, 70 V and 120 V.

Replaces manual soak tanks

Moving from a passive soak tank or a single-cylinder tester to this six-cylinder machine cuts total cleaning time when servicing multi-cylinder engines. The jump is worth it when you regularly clean full injector sets for cars or motorcycles and need simultaneous ultrasonic cleaning combined with PWM pulse testing up to 20.0 ms.

Simple bench setup with AC 110 V 60 Hz supply

The tester plugs into a standard 110 V outlet and includes an accessory kit and user manual. A drain valve on the 2000 ml tank simplifies fluid changes. Common issues include forgetting to match the DC voltage setting to the injector type and overfilling cylinders beyond the 110 ml single-cylinder capacity.

Highlights

  • Cleans six injectors simultaneously with 28kHz ultrasonic power
  • Tests EFI GDI and FSI injectors at adjustable 12V 70V 120V
  • Nine selectable modes cover pulse width from 0 to 20.0 ms
  • Large 2000 ml tank holds 67.6 fl oz of cleaning solution
  • Compact 14.57 by 14.57 by 15.94 inch footprint fits workshop bench

Specifications

TypeOther Appliances

Questions about this item

What bench space and clearance does the VT180 need with its 14.57 x 14.57 x 15.94 in footprint?

The unit measures 14.57 in wide, 14.57 in deep and 15.94 in high, so allow at least that much flat bench area plus room for the lid to open and for hose connections at the rear.

Which step do users most often miss when installing the VT180 on a 110 V 60 Hz supply?

Connect the mains lead to a grounded AC 110 V 60 Hz outlet, fill the 2000 ml tank with cleaning fluid, then attach each injector to its cylinder before selecting a test mode — skipping the fluid fill causes the 70 W ultrasonic transducer to run dry.

When should the cleaning fluid in the 2000 ml tank be replaced?

Replace the fluid when it becomes visibly contaminated or after several cleaning cycles, because the 28 kHz ultrasonic cavitation loses effectiveness once the solution is saturated with carbon and debris.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.