We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black steel clamp-on pallet forks with adjustable cross bar, 43 inch tines, rectangular tube frame

VEVOR

VEVOR Pallet Forks 4000 lbs 43" Fork Adjustable Stabilizer Bar

SKU CH-PDNM-QEN1E

Clamp-on pallet forks with 43-inch blades, 4000 lb capacity, and an adjustable stabiliser bar spanning 19.5 to 36 inches for secure load handling

  • TypeOther Appliances
  • Handles heavy loads up to 4000 lbs with durable square steel tubing
  • Adjustable stabiliser bar from 19.5 to 36 inches prevents fork separation under weight
  • Reinforced bolts and grooved screw heads ensure long-lasting clamping strength
  • Clamps onto bucket cutting edge in seconds for quick attachment changes
  • 43-inch fork blades move logs, hay bales, fence posts and debris

4000 lb capacity clamp-on pallet forks

These clamp-on pallet forks are built from square steel tubing rated for a 4000 lb load capacity. They attach directly to a tractor or skid-steer bucket by sliding over the cutting edge and clamping down, providing a secure lift point for farm and landscaping materials. The 43-inch fork blades measure 2 inches high by 2.75 inches wide, with an overall length of 60 inches.

Adjustable stabiliser bar replaces fixed-width forks

The stabiliser bar adjusts between 19.5 and 36 inches, keeping the forks from spreading under heavy loads. This range replaces fixed-width attachments that cannot adapt to varying pallet sizes or bucket lip gaps. The upgrade is worth it when you handle mixed loads such as logs, fence posts, hay bales and debris on a regular basis.

Check bucket lip dimensions

The attachment requires a bucket lip gap of 2.6 inches and fits rectangular lips measuring 9.3 inches above and 13.8 inches below the cutting edge. Both the upper and lower clamp tubes are 2 by 4 inches with a 0.16-inch wall thickness. Verify these measurements on your existing bucket to ensure a proper clamp fit.

Highlights

  • Handles heavy loads up to 4000 lbs with durable square steel tubing
  • Adjustable stabiliser bar from 19.5 to 36 inches prevents fork separation under weight
  • Reinforced bolts and grooved screw heads ensure long-lasting clamping strength
  • Clamps onto bucket cutting edge in seconds for quick attachment changes
  • 43-inch fork blades move logs, hay bales, fence posts and debris

Specifications

TypeOther Appliances

Questions about this item

What bucket lip thickness and gap does the clamp opening fit?

The clamp fits a rectangular bucket lip 9.3 inches above, 13.8 inches below, with a 2.6 inch gap, all on 2 by 4 by 0.16 inch tubing.

What is the step people miss when clamping the forks onto the bucket?

After sliding the forks over the cutting edge, the bolts must be tightened evenly so the 1.6 inch outer tubes grip both the upper and lower lip surfaces without shifting.

How often should the adjustable stabilizer bar pins be checked or replaced?

Inspect the pins each time the bar is moved between 19.5 and 36 inches; replace any pin that shows wear or no longer locks securely in the 1.2 inch inner tube holes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.