We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of red steel pallet fork extensions, 82 inches long, 4.5 inch inner width, powder-coated finish with locking pins

VEVOR

VEVOR Pallet Fork Extensions 82" 4.5" Width Red Pair

SKU CH-Y47B-32F74

Pair of 82" Q235 carbon steel fork extensions with 4,000 lb capacity, fitting 4.2" forks and secured by pins

  • TypeOther Appliances
  • Width6.69
  • 28 in total length extends reach for large loads
  • Q235 carbon steel construction supports 4000 lbs capacity
  • One-piece welded design with powder coat resists rust
  • Inner width 4.53 in fits 4.2 in standard forks
  • Tool-free pin installation enables quick attachment and removal

Forklift Extensions for 4.2 in Forks

These steel fork extensions add 82.28 in of reach to forklifts fitted with 4.2 in wide forks. The pair is built from Q235 carbon steel and rated at 4000 lbs capacity. Warehouse and yard operators gain extra length without changing the truck.

One-Piece Welded Construction

Seamless one-piece welding gives the extensions structural rigidity under load. A powder-coated finish protects the steel from rust in humid or corrosive environments. Each extension weighs 73.19 lbs and mounts without tools using the supplied pins.

Sustained Heavy Load Handling

The 4.53 in inner width and 1.97 in outer height keep the load stable during extended transport cycles. Rated capacity of 1.815 tons is maintained across the full 2090 mm length without permanent deflection. Not suited for forks wider than 4.2 in or loads exceeding the stated rating.

Highlights

  • 28 in total length extends reach for large loads
  • Q235 carbon steel construction supports 4000 lbs capacity
  • One-piece welded design with powder coat resists rust
  • Inner width 4.53 in fits 4.2 in standard forks
  • Tool-free pin installation enables quick attachment and removal

Specifications

TypeOther Appliances
Width6.69

Questions about this item

How do I fit these 82.28" fork extensions onto 4.2" forks and which step is most often missed?

Slide each extension over the fork until the inner width of 4.53" seats fully, then insert the supplied pins through the aligned holes and secure them with the four Type-B split pins; the split pins are the step most often forgotten.

What maintenance or replacement will these Q235 carbon steel extensions need over time?

Inspect the powder-coat finish for chips after heavy use and touch up any bare metal to prevent rust; replace the two locking pins and four split pins if they show wear or deformation.

At what load limit does the 4000 lbs rating become the limiting factor during sustained lifts?

The 4000 lbs / 1.815 ton capacity is the structural limit; exceeding it risks permanent bending of the 1.97" high fork profile even if the forklift itself can lift more.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.