We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red steel painting rack with eight adjustable hooks and four swivel casters

VEVOR

VEVOR Painting Rack 1500-2000mm 66 lbs 8 Hooks Red

SKU CH-DX7J-1S3GB

Adjustable steel painting rack holds 66 lbs on eight hooks, extends to 2010 mm high and 1800 mm long, rolls on four swivel casters with two brakes

  • TypeOther Appliances
  • Holds up to 66 lbs of car parts using eight adjustable hooks
  • Height extends from 1500 mm to 2010 mm for flexible positioning
  • Length adjusts by 320 mm up to 1800 mm to fit different workspaces
  • Four 3-inch swivel casters with two brakes give smooth mobility and secure stability
  • Heavy-duty steel frame with powder-coated finish resists wear in daily shop use

Adjustable painting rack for auto body work

The VEVOR painting rack is a height-adjustable stand built for auto repair shops and garages that need to hang car parts while painting or drying. It extends from 1500 mm to 2010 mm in height and from 1480 mm to 1800 mm in length. Eight hooks, two large and six small, hold panels, doors or trim pieces during prep and cure cycles.

Capacity and mobility limits

Total load is capped at 66 lbs / 30 kg distributed across all hooks. The frame weighs 29.1 lbs / 13.2 kg and rolls on four 3-inch swivel casters, two of which have brakes to lock the rack in place. Height adjusts in 540 mm of travel and length in 320 mm of travel, so very long or tall components may exceed the maximum envelope.

Check your workspace and parts

Measure the largest panel you plan to hang against the 70.9" maximum length and 79.1" maximum height. Confirm the floor is level enough for the casters to roll and brake reliably. Verify that the 66 lb combined weight limit covers the heaviest door, hood or roof skin you intend to suspend.

Highlights

  • Holds up to 66 lbs of car parts using eight adjustable hooks
  • Height extends from 1500 mm to 2010 mm for flexible positioning
  • Length adjusts by 320 mm up to 1800 mm to fit different workspaces
  • Four 3-inch swivel casters with two brakes give smooth mobility and secure stability
  • Heavy-duty steel frame with powder-coated finish resists wear in daily shop use

Specifications

TypeOther Appliances

Questions about this item

Should I choose the shorter or taller height setting for my garage?

The rack adjusts from 1500 mm up to 2010 mm in height, so pick the taller setting if you need to hang longer parts or want more clearance overhead.

What does the 66 lbs capacity mean when the rack is fully extended?

The 66 lbs / 30 kg limit applies across the whole adjustable range, whether the rack is at its minimum 1500 mm height or fully extended to 2010 mm.

How do the 3-inch swivel casters affect stability on a concrete floor?

Four 3-inch swivel casters, two with brakes, let you roll the 29.1 lbs rack smoothly and lock it firmly in place on concrete.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.