We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical starter motor with mounting flange and electrical terminals

VEVOR

VEVOR High Torque Starter Motor 00-032 for Buick Chevy Suzuki

SKU CH-89J4-Z79QA

High-torque starter motor fitting Buick, Chevy and Suzuki models with M8 power stud and signal plug, weighing 6.1 lbs

  • TypeOther Appliances
  • Width5.51
  • High torque cranking for Buick, Chevy and Suzuki engines
  • M8 power stud and female signal plug for direct fit
  • Weighs 6.1 lbs (2.75 kg) for manageable installation
  • Compact 7.3 x 5.5 x 3.9 in body fits tight engine bays
  • Replaces OEM parts 17986 and 31100-78J00

High-Torque Starter Motor 00-032

The VEVOR starter motor 00-032 replaces original units on Buick, Chevy and Suzuki applications using part numbers 17986 and 31100-78J00. It delivers high cranking torque for reliable cold starts in daily-driven vehicles. The package includes the motor and a user manual for straightforward installation. Mechanics and DIY owners fitting compatible engines will find it a direct bolt-on solution.

M8 Stud Power Connector and Signal Plug

Electrical connection uses an M8 stud for the main power feed and a female plug for the signal circuit. The housing measures 185 by 140 by 100 millimetres and weighs 2.75 kilograms. Normal operation draws current only during cranking, so parasitic drain and audible noise are negligible when the engine is running. The compact outline fits the factory mounting points without modification.

Sustained Cranking Behaviour

Under extended cranking cycles the high-torque winding maintains consistent output without the speed drop-off seen in standard units. Heat builds in the windings during repeated long cranks, so allowing cool-down intervals protects internal insulation. The 5.51-inch width ensures clearance matches the original equipment envelope. Vehicles with heavily modified compression or oversized displacement may exceed the design envelope.

Highlights

  • High torque cranking for Buick, Chevy and Suzuki engines
  • M8 power stud and female signal plug for direct fit
  • Weighs 6.1 lbs (2.75 kg) for manageable installation
  • Compact 7.3 x 5.5 x 3.9 in body fits tight engine bays
  • Replaces OEM parts 17986 and 31100-78J00

Specifications

TypeOther Appliances
Width5.51

Questions about this item

How do I install the M8 stud power connector and signal plug without stripping threads?

Torque the M8 power stud to the vehicle service manual value, seat the signal plug until it clicks, then verify the 7.3 in length clears the bell housing before final tightening.

Which wearable parts inside the 00-032 will need replacement after extended cranking cycles?

The internal brushes, commutator, and drive pinion are the service items; plan to inspect them when cranking speed drops or the 6.1 lb unit sounds rough.

What thermal limit appears first during repeated hot starts with this 185 mm long starter?

The solenoid windings and brush insulation hit their temperature ceiling before the aluminium housing, causing cranking torque to fade until the unit cools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.