We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight silver steel E-track rails with slots and assorted silver hardware fittings

VEVOR

VEVOR E-Track Tie-Down Rail Kit 34PCS 5FT

SKU CH-Z6NW-64DWP

34-piece E-track kit with eight 5 ft steel rails, O-rings, D-ring tie-offs and end caps secures cargo up to 1,500 lb working load

  • TypeOther
  • Width7.09
  • 34-piece kit secures diverse cargo with rails, O-rings, D-ring tie-offs and end caps
  • 1,500 lb working load limit handles motorcycles, bikes and heavy equipment
  • 4,500 lb breaking strength provides a 3:1 safety margin for sudden stops
  • 45# steel rails resist bending and corrosion over long-term use
  • Five-foot rails with 30 slots allow flexible anchor positioning along the track

5 ft E-Track Kit for Cargo

The VEVOR E-Track Tie-Down Rail Kit provides 34 pieces of securing hardware for cargo, motorcycles and bikes. Eight steel rails each measure 5 ft in length and feature 30 slots for flexible attachment points. The set includes O-rings, tie-offs with D-rings and end caps made from 45# steel.

Surface Mount with Basic Tools

Rails are 5.20 in wide and 0.09 in thick with a slot size of 0.98 x 2.36 in for standard E-track fittings. Installation requires drilling mounting holes in the trailer or van floor using the pre-drilled rail holes as a guide. The most common issue is misaligned holes causing bolts to bind or rails to sit unevenly.

Ideal for Light Commercial Loads

The system suits owners who need a 1500 lbs working load limit and 4500 lbs breaking strength for motorcycles, ATVs or general freight. Builders who require a higher load rating or recessed airline track profiles should look at alternative systems. Buyers needing longer continuous runs without joints will also need a different solution.

Highlights

  • 34-piece kit secures diverse cargo with rails, O-rings, D-ring tie-offs and end caps
  • 1,500 lb working load limit handles motorcycles, bikes and heavy equipment
  • 4,500 lb breaking strength provides a 3:1 safety margin for sudden stops
  • 45# steel rails resist bending and corrosion over long-term use
  • Five-foot rails with 30 slots allow flexible anchor positioning along the track

Specifications

TypeOther
Width7.09

Questions about this item

How do I verify the rails are holding the rated load after installation?

Each rail is rated for a 1500 lbs working load and 4500 lbs breaking strength; apply tension gradually and confirm the O-rings and D-ring tie-offs engage the 0.98 x 2.36 in slots without deformation.

What components are included and what must be sourced separately?

The kit supplies 8 steel rails, 8 O-rings, 8 D-ring tie-offs, 8 end caps and a user manual; mounting hardware such as bolts or screws for your trailer or truck bed is not included.

Which capacity should I choose for securing motorcycles versus general cargo?

The single 5 ft kit provides 30 slots per rail and a 1500 lbs working load per rail, suitable for motorcycles and heavy cargo; add additional kits if more tie-down points or longer runs are needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.