We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR 28-piece coolant pressure tester kit in a storage case

VEVOR

VEVOR Coolant Pressure Tester Kit 28pcs 2.5 bar -0.83 bar 6061 Aluminum

SKU CH-6BVT-9YYZV

28-piece kit pressure-tests cooling systems to 2.5 bar, vacuums to -0.83 bar, and refills coolant with 6061 aluminium pump and multiple adapters

  • Width13.58
  • Complete 28-piece kit covers leak detection, pressure testing and coolant refill in one case
  • Pressure pump reads up to 2.5 bar and 35 psi for accurate system diagnostics
  • Vacuum refill tool achieves -0.83 bar maximum vacuum to purge air pockets efficiently
  • 6061-T5 aluminium pump and purge filler resist corrosion and handle repeated workshop use
  • Nine colour-coded caps plus four adapters and a universal tapered adapter fit most vehicle models

Complete Cooling System Test Kit

The VEVOR 28-piece kit combines a pressure pump, vacuum refill tool, nine plastic radiator caps, four cap adapters, a universal tapered adapter, thermometer, cap wrench, hose, sealing tape and European air fitting in a single case. It covers leak detection, pressure testing and coolant refilling for most cars, SUVs and light trucks.

For Workshops and Serious DIYers

Technicians who need a full set of colour-coded caps and a 6061-T5 aluminium pump rated to 2.5 bar will find every component matched to models 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 19. Buyers who only need a simple pressure cap tester or a single adapter size should look at smaller, dedicated tools instead.

Straightforward Setup with Careful Sealing

The pump threads onto the chosen cap or universal adapter, the gauge reads 0 to 35 psi and the vacuum tool pulls to -0.83 bar for bubble-free refilling. The most common issue is forgetting to lubricate the six rubber rings or misaligning the tapered adapter, which causes false low-pressure readings.

Highlights

  • Complete 28-piece kit covers leak detection, pressure testing and coolant refill in one case
  • Pressure pump reads up to 2.5 bar and 35 psi for accurate system diagnostics
  • Vacuum refill tool achieves -0.83 bar maximum vacuum to purge air pockets efficiently
  • 6061-T5 aluminium pump and purge filler resist corrosion and handle repeated workshop use
  • Nine colour-coded caps plus four adapters and a universal tapered adapter fit most vehicle models

Specifications

Width13.58

Questions about this item

What adapter models are included so I can match them to my radiator cap?

The kit provides 28 pieces including 9 plastic radiator caps, 4 cap adapters, 1 universal adapter, 1 European air fitting and a radiator cap wrench. Compatible vehicle models are listed as 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 19.

Can I use the vacuum refill tool on an older radiator that has a non-standard neck?

The vacuum and refill tool is built from 6061-T5 aluminium with rubber seals and a universal tapered adapter, designed to seal on most cars, SUVs and light trucks including BMW, Ford, Fiat, Volkswagen, Porsche, Mercedes-Benz and Nissan.

How do I verify the pressure pump is holding the correct 2.5 bar during a leak test?

The shock-resistant gauge reads 0 to 2.5 bar (0 to 35 psi). Pressurise the system, watch the needle; if it remains steady at the test pressure the circuit is holding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.