We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal pressure pot with 1.8 mm spray gun and coiled hoses

VEVOR

VEVOR 2 L Spray Paint Pressure Pot 1.8 mm Gun 45 PSI

SKU CH-7YAK-9TZCP

A 2 L pressure pot with a 1.8 mm spray gun and adjustable pressure up to 45 psi for portable painting

  • TypeOther Appliances
  • Width6.3
  • Lightweight 4.1 lb tank for easy overhead work
  • 2 L capacity reduces refill breaks during large jobs
  • 8 mm nozzle gun included — no separate purchase needed
  • Adjustable pressure up to 45 psi for fine finish control
  • 3 m hose set lets you move freely around the workpiece

Portable 2 L Pressure Pot

The VEVOR 2 L spray paint pressure pot delivers pressurised fluid to the included 1.8 mm nozzle gun for architectural, automotive and decorative coating work. Its 4.1 lb net weight and integrated carry handle let a single operator move the 0.5 gal tank to ceilings or elevated surfaces without a separate compressor-mounted reservoir. The 1/4 in air inlet and 3/8 in fluid outlet connect to standard shop air lines for immediate use.

Setup and Common Issues

Connect the 3 m hose set between the 1/4 in air inlet and your regulator, then fill the 4.9 × 8.1 in bucket through the top opening before sealing the lid. The three gun knobs control air volume, fluid flow and fan width; start with low pressure and open each knob gradually to avoid runs or orange peel. Over-tightening the lid gasket or running above 45 psi often causes leaks at the sealant port, so apply the supplied 10 ml sealant sparingly and re-check torque after the first pressurisation.

Pressure and Material Limits

The tank is rated to a maximum of 45 psi (3.1 bar); exceeding this pressure risks lid deformation and voids the pressure-vessel safety margin. Latex and other high-viscosity coatings require a separate gun with a 4 mm or larger nozzle, which is not included, so the supplied 1.8 mm tip is limited to thinned enamels, stains and clear coats. Continuous spraying time depends on compressor recovery rate, not on the pot itself, so plan refill intervals for large surface areas.

Highlights

  • Lightweight 4.1 lb tank for easy overhead work
  • 2 L capacity reduces refill breaks during large jobs
  • 8 mm nozzle gun included — no separate purchase needed
  • Adjustable pressure up to 45 psi for fine finish control
  • 3 m hose set lets you move freely around the workpiece

Specifications

TypeOther Appliances
Width6.3

Questions about this item

How can I confirm the tank is holding pressure correctly after assembly?

Pressurise the pot up to the 45 psi maximum and watch the gauge; the needle should stay steady without dropping.

What items are included and what must I supply separately?

The box contains the 2 L pot, 1.8 mm spray gun, 3 m hoses, user manual and 10 ml leak-repair sealant; you must provide an air compressor and fittings for the 1/4 in air inlet and 3/8 in fluid outlet.

Which nozzle size suits the paints I plan to spray?

The supplied 1.8 mm nozzle handles ordinary latex, metallic and similar coatings; for thicker latex a 4 mm or larger nozzle is required and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.