Vertiv
Vertiv VRC100KIT 10U rack-mount server rack cooling unit 3.5kW 120V 60Hz
A self-contained 3.5 kW cooling unit mounts in a standard 19-inch rack using 10U of space and plugs into a 120 V 60 Hz NEMA 5-20P outlet
- TypeRack Enclosure
- FeaturesSelf-contained, rack-mounted system offers flexibility that
- Unit Dimension17.30" x 17.40" x 38.50"
- Unit Weight161 lbs.
- Self-contained design fits 10U rack space for compact cooling
- 5 kW capacity removes 12000 BTU per hour from dense loads
- Mounts in any standard 19-inch rack without extra floor area
- Plug-and-play setup with NEMA 5-20P cord and included duct kit
- Variable-speed components cut energy use while SNMP, HTTP and Modbus enable remote monitoring
10U 3.5 kW Rack-Mount Cooling Unit
The Vertiv VRC100KIT is a new, self-contained air cooler that occupies 10U in any standard 19-inch rack. It delivers 3.5 kW (12000 BTU) of cooling on a single-phase 120 V, 60 Hz supply with a NEMA 5-20P plug. Variable-speed components scale capacity to match load, reducing operational cost. Advanced controls support remote management via SNMP, HTTP and Modbus.
Small IT Spaces Needing Plug-and-Play Cooling
This unit suits operators of smaller server rooms or edge sites who want a factory-assembled cooler that installs without specialised piping or contractors. Lifting straps and a heat-rejection duct kit simplify the initial setup. Buyers who require higher heat removal than 3.5 kW, need three-phase power, or must cool multiple racks from a central plant should look at alternative solutions.
120 V Single-Phase Power Requirement
The cooler runs on 120 V, 60 Hz single-phase power and draws 3500 W for cooling, consuming 1266.1 kJ of energy. A compatible NEMA 5-20P receptacle on a 20 A circuit is mandatory; sites without this voltage or circuit capacity cannot operate the unit.
Highlights
- Self-contained design fits 10U rack space for compact cooling
- 5 kW capacity removes 12000 BTU per hour from dense loads
- Mounts in any standard 19-inch rack without extra floor area
- Plug-and-play setup with NEMA 5-20P cord and included duct kit
- Variable-speed components cut energy use while SNMP, HTTP and Modbus enable remote monitoring
Specifications
| Brand | Vertiv |
|---|---|
| Model | VRC100KIT |
| Type | Rack Enclosure |
| Features | Self-contained, rack-mounted system offers flexibility that is ideal for smaller IT spaces Mounts in any standard 19-inch rack, making it easily adaptable and saving valuable IT floorspace Easy-to-install system with plug-and-play installation and a simple heat rejection duct kit Easy-to-handle cooling unit comes standard with lifting straps, making installation a breeze Highly efficient unit with scalable capacity due to variable speed components provides lower operational costs Advanced controls allow for easy remote access through SNMP, HTTP, and Modbus |
| Unit Dimension | 17.30" x 17.40" x 38.50" |
| Unit Weight | 161 lbs. |
| Shipping weight | 133.81 kg |
| Package size | 762 × 711 × 711 mm |
Questions about this item
How much heat does the 3.5 kW rating actually remove from a loaded rack?
The unit provides 12,000 BTU per hour of cooling capacity, which equals 3.5 kW of heat removal for equipment inside the rack.
What does the NEMA 5-20P plug require from the site power circuit?
It needs a single-phase 120 V, 60 Hz circuit with a 20 A receptacle; the cooler draws 3,500 W when running.
Will the 17.30 by 17.40 by 38.50 inch chassis fit in a standard 19-inch rack?
Yes, it mounts in any standard 19-inch rack and occupies 10 U of vertical space.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Lenovo 4X60N04886 Nvidia Quadro P5000 16GB GDDR5X ai accelerator card
- GDDR5
NVIDIA H200 NVL AI Accelerator Card 141GB HBM3e PCIe 5.0 x16 900-21010-0040-000
- PCI Express 5.0 x16
- NVIDIA



