Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086372BTC
In stock
Vertiv
Vertiv PD5-201 Maintenance Bypass POD 2×IEC C19 6×IEC C13 208V
Power output distribution unit with maintenance bypass for GXT5 5-6kVA 208V UPS models, providing two IEC C19 and six IEC C13 outlets via hardwired input
- FeaturesThe Vertiv Liebert PD5-201 is a power output distribution (P
- Maintenance bypass keeps equipment powered during UPS service
- Two IEC C19 outlets support high-current devices
- Six IEC C13 outlets connect standard rack gear
- Hardwired input integrates with facility wiring
- Plug-and-play replacement reduces rack space and install time
Maintenance Bypass POD for GXT5 5-6kVA HV
The Vertiv PD5-201 is a power output distribution unit with integrated maintenance bypass. It is designed for Vertiv Liebert GXT5 5-6kVA high-voltage UPS models operating at 208V. The unit replaces the existing POD on the UPS rear panel, enabling plug-and-play installation. It allows technicians to service or replace the UPS without interrupting power to connected equipment.
Two IEC C19 and Six IEC C13 Outputs
The POD provides eight total outlets: two IEC C19 and six IEC C13 receptacles for connecting servers and network gear. Input power is supplied via a hardwired terminal block linked to the AC source. This configuration consolidates power distribution and bypass switching into a single rack-mounted accessory. No additional software or accessories are bundled with the unit.
Suits Facilities Running GXT5 5-6kVA HV UPS Systems
This product suits data centres and network rooms that require continuous uptime during UPS maintenance on compatible Vertiv GXT5 high-voltage models. It is not suitable for low-voltage UPS units or models outside the 5-6kVA range. Buyers needing different outlet counts, voltage ratings, or bypass functionality for other UPS brands should look elsewhere.
Highlights
- Maintenance bypass keeps equipment powered during UPS service
- Two IEC C19 outlets support high-current devices
- Six IEC C13 outlets connect standard rack gear
- Hardwired input integrates with facility wiring
- Plug-and-play replacement reduces rack space and install time
Specifications
| Brand | Vertiv |
|---|---|
| Model | PD5-201 |
| Features | The Vertiv Liebert PD5-201 is a power output distribution (POD) unit with built-in maintenance bypass functionality. Designed for the Vertiv Liebert GXT5 5-6kVA High Voltage (208V) uninterruptible power supply (UPS) models, it is a POD accessory that allows you to perform UPS maintenance and/or replacement without power interruption to the connected load. The PD5-201 is a plug-and-play unit that replaces the existing POD unit on the back of your UPS, reducing rack space and labor hours. It comes with two (2) IEC C19 and six (6) IEC C13 outlets and has an input terminal block to be ha |
| Shipping weight | 4.54 kg |
| Package size | 562 × 249 × 202 mm |
Questions about this item
Will the IEC C19 and C13 outlets on the PD5-201 need periodic replacement?
The outlets are integral to the unit; no user-replaceable outlet modules are specified, so the whole POD would be swapped if an outlet fails.
What limits continuous operation of the PD5-201 when the UPS is under full load?
The hardwired input terminal block and the 208 V rating set the maximum current the bypass path can carry without tripping upstream protection.
Does the PD5-201 add audible noise or extra heat when the UPS runs all day in bypass mode?
The unit has no fans or active components, so it adds no audible noise and only minimal passive heat from the bypass conductors.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00084005BTC
In stock
