We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertiv PD2-109 PDU metal enclosure two NEMA L14-30R outlets hardwire input

Vertiv

Vertiv PD2-109 2-Outlet PDU 2×NEMA L14-30R 60A 208V/120V

SKU CH-5JVB-YWKHH MPN PD2-109

Two-outlet PDU with dual NEMA L14-30R receptacles accepts 60 A hard-wired 208 V/120 V input for GXT4 8-10 kVA UPS maintenance bypass

  • TypeConsumer Electronics
  • FeaturesProduct Type:PDU Product Name:PD2-109 2-Outlets PDU Output R
  • Weight4.40 lb
  • Delivers 60 A three-phase power for high-density rack loads
  • Two NEMA L14-30R outlets supply both 208 V and 120 V circuits
  • Hardwire 4-wire input enables direct panel connection without plug adapters
  • Maintenance bypass keeps connected equipment online during UPS service
  • Lightweight 4.40 lb chassis simplifies rack mounting and cable routing

Maintenance bypass PDU

The Vertiv PD2-109 is a power distribution unit that provides a maintenance bypass for Liebert GXT4 8-10kVA UPS systems. It allows technicians to service or replace the UPS without interrupting power to connected equipment. The unit accepts a hardwired 4-wire input with two phases, neutral and ground. It is built for commercial and industrial environments that require continuous uptime.

Hardwired input and 60 A rating

The PDU connects directly to a 208V/120V three-phase supply rated at 60 A through a 4-wire hardwired connector. Two NEMA L14-30R output receptacles distribute power to the load. The enclosure weighs 4.40 lb and mounts in a standard rack or on a wall. Passive power distribution means no active cooling is required and the unit adds no audible noise to the installation.

Two NEMA L14-30R outlets

This model provides exactly two NEMA L14-30R receptacles, so it suits installations that need dual 30 A locking outlets from a single 60 A feed. Sites requiring more than two outlets, a different receptacle type, or a lower input current rating cannot use this PDU. The part is listed for GXT4 8-10kVA models and was first offered in 2024.

Highlights

  • Delivers 60 A three-phase power for high-density rack loads
  • Two NEMA L14-30R outlets supply both 208 V and 120 V circuits
  • Hardwire 4-wire input enables direct panel connection without plug adapters
  • Maintenance bypass keeps connected equipment online during UPS service
  • Lightweight 4.40 lb chassis simplifies rack mounting and cable routing

Specifications

BrandLiebert
ModelPD2-109
TypeConsumer Electronics
FeaturesProduct Type:PDU
Product Name:PD2-109 2-Outlets PDU
Output Receptacles:2 x NEMA L14-30R
Weight4.40 lb
Shipping weight4.08 kg
Package size522 × 302 × 220 mm

Questions about this item

How is the hard-wire 4-wire input connected, and which step is most often missed?

The 4-wire feed (2PH+N+G) must be landed on the internal terminal block by a qualified electrician; the step most often missed is torquing each lug to the specified value and verifying phase rotation before energising.

What maintenance or replacement will the two NEMA L14-30R outlets need over time?

Inspect the L14-30R contacts annually for discolouration or looseness; replace any receptacle that shows pitting or fails a clamp-force test to maintain reliable 30 A connections.

What is the first limit reached when the PDU runs continuously at full 60 A load?

The 60 A input rating is the hard ceiling; sustained draw at that level will trip the upstream breaker before any internal component reaches a thermal limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.