We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertiv PD2-103 maintenance bypass panel with four 5-20R and four L6-30R outlets

Vertiv

Vertiv PD2-103 Maintenance Bypass Accessory 4×5-20R 4×L6-30R

SKU CH-Y3CG-K2CR0 MPN PD2-103

Maintenance bypass panel with hard-wire input terminal block supplying four NEMA 5-20R and four NEMA L6-30R outlets for compatible Liebert GXT3 and GXT4 UPS units

  • TypeConsumer Electronics
  • Output Connector(s)4 x NEMA 5-20R 4 x NEMA L6-30R
  • Weight6.60 lbs.
  • Maintains power during UPS service with hardwired 3-wire plus ground input
  • Distributes 120 V and 230 V loads through four NEMA 5-20R and four NEMA L6-30R outlets
  • Supports Liebert GXT3 and GXT4 8 kVA and 10 kVA 208 V UPS systems
  • Enables hot-swap UPS replacement without interrupting connected equipment
  • Weighs 6.60 lb for straightforward rack mounting

Maintenance Bypass for Liebert UPS

The Vertiv PD2-103 is a maintenance bypass accessory designed for Liebert GXT3 and GXT4 UPS systems rated at 8000 and 10000 VA. It allows connected equipment to remain powered while the UPS is serviced or replaced. The unit is intended for data centre and critical infrastructure installations requiring continuous uptime. It ships new and ready for rack integration.

Hardwire Input with Mixed NEMA Outputs

Input power connects through a hardwire terminal block with three wires plus ground, accepting 120 V AC or 230 V AC supply. Output distribution provides four NEMA 5-20R T-slot receptacles and four NEMA L6-30R locking receptacles. The mixed outlet arrangement supports both standard and locking plug equipment from a single bypass panel. No other input or output interfaces are included.

Compatibility Limited to Listed UPS Models

This bypass panel is validated only for the Liebert GXT3-8000RT208, GXT3-10000RT208, GXT4-8000RT208 and GXT4-10000RT208 UPS systems. It will not integrate with other UPS capacities, voltages or form factors. Buyers operating different Liebert models or third-party UPS units must select an alternative bypass solution.

Highlights

  • Maintains power during UPS service with hardwired 3-wire plus ground input
  • Distributes 120 V and 230 V loads through four NEMA 5-20R and four NEMA L6-30R outlets
  • Supports Liebert GXT3 and GXT4 8 kVA and 10 kVA 208 V UPS systems
  • Enables hot-swap UPS replacement without interrupting connected equipment
  • Weighs 6.60 lb for straightforward rack mounting

Specifications

BrandLiebert
ModelPD2-103
TypeConsumer Electronics
Output Connector(s)4 x NEMA 5-20R
4 x NEMA L6-30R
Weight6.60 lbs.
Shipping weight4.08 kg
Package size530 × 310 × 235 mm

Questions about this item

Should I pick the PD2-103 or a different maintenance bypass for my UPS?

The PD2-103 is designed for the Liebert GXT3-8000RT208, GXT3-10000RT208, GXT4-8000RT208 and GXT4-10000RT208 UPS systems; choose it when your unit is one of those models.

What does the hardwire terminal-block input mean when the PD2-103 is installed?

It means the bypass connects directly to building wiring through a 3-wire-plus-ground terminal block, accepting 120 V AC or 230 V AC supply without a plug.

What does the mix of NEMA 5-20R and L6-30R outlets cap in practice?

The four 5-20R T-slot receptacles support up to 20 A at 120 V, while the four L6-30R twist-lock receptacles support up to 30 A at 208/230 V, limiting each connected load to its receptacle rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.