We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6 UTP cable on a large spool, 1000ft length

VCOM International Ltd

VCOM International Ltd NC614-1000-BLACK 1000ft Cat6 UTP cable (Black)

SKU CH-Y0V2-5DAZ7

Supplies 1000 ft of Cat6 UTP cable for structured wiring, verified to UL, ETL and EMC standards with 100 ohm impedance up to 250 MHz

  • 1000 ft length covers large installations without joins
  • Cat6 UTP rated to 250 MHz for gigabit speeds
  • Black jacket simplifies cable identification in dense racks
  • UL / ETL / EMC verified for safety compliance
  • Tensile strength 93 N / 25 lbs resists pulling damage

1000ft Cat6 UTP cable

This 1000-foot Category 6 unshielded twisted-pair cable supplies bulk networking wire for installers running structured cabling in commercial or residential buildings. The black jacket simplifies identification in dense patch panels or conduit runs. It is sold new in a single continuous length.

250 MHz bandwidth and 100 Ω impedance

The cable is verified to 250 MHz with a characteristic impedance of 100 Ω ± 15 %, limiting usable frequency to that range. Propagation delay reaches 536 ns per 100 metres at the top frequency and delay skew is capped at 25 ns maximum. Mutual capacitance measures 5.6 nF per 100 metres at 1 kHz.

25 lb tensile limit and 6.65 Ω/km resistance

Maximum pulling tension is 25 lbs (11.35 kg) and DC resistance reaches 6.65 Ω per kilometre, so runs approaching the full 1000 ft must stay within those electrical and mechanical limits. The bending radius equals four times the cable diameter. Buyers needing shielded construction or higher frequency ratings should select a different cable type.

Highlights

  • 1000 ft length covers large installations without joins
  • Cat6 UTP rated to 250 MHz for gigabit speeds
  • Black jacket simplifies cable identification in dense racks
  • UL / ETL / EMC verified for safety compliance
  • Tensile strength 93 N / 25 lbs resists pulling damage

Specifications

No published specifications for this item yet.

Questions about this item

What length of this Cat6 UTP cable should I choose?

The reel supplied is 1000 ft of black Cat6 UTP cable; order the length your installation requires.

What does the 250 MHz rating mean once the cable is installed?

Characteristic impedance is 100 ohm ±15 % from 1 MHz to 250 MHz, with transport delay up to 536 ns per 100 m and delay skew of 25 ns maximum.

Which standard does the cable meet and what does it cap in practice?

UL / ETL / EMC verified Cat6 UTP; maximum DC resistance 6.65 ohms per km, mutual capacitance 5.6 nF max per 100 m, NVP 65 % to 70 %.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.