We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear plastic RJ45 pass-through connectors, 50 pieces

VCE Cat6 RJ45 Pass-Through Connectors 50-Pack

SKU CH-X7CK-6X42M

Pass-through design lets wires feed through for easier termination and supports up to 10 Gbps over Cat6 cable

  • TypeEthernet
  • Cat6
  • Connector ACat6 Unshielded
  • ColorTransparent
  • ShieldedUnshielded
  • FeaturesUp to 10 Gbps 250MHz transmission, Pass-through, Unshielded,
  • Pass-through design lets you verify wire order before crimping
  • Gold-plated phosphor-bronze contacts resist oxidation for reliable 10 Gbps links
  • Supports 24–26 AWG solid or stranded cable and 23 AWG solid Cat6
  • UL-listed flame-retardant housing meets safety requirements for office and home use
  • 50 connectors per pack with included operating instruction for quick DIY termination

Cat6 Pass-Through Connectors 50-Pack

These VCE RJ45 pass-through connectors let you terminate Cat6 UTP cables on-site with a standard crimper. The transparent unshielded plugs accept 24 to 26 AWG solid or stranded conductors and 23 AWG solid cable. Gold-plated phosphor bronze contacts support up to 10 Gbps at 250 MHz. The pack contains fifty connectors and an instruction sheet.

Upgrade from standard closed-end plugs

The pass-through design lets wires exit the front so you can verify the colour sequence before crimping, reducing wiring errors. Three-prong contact blades pierce each conductor more reliably than two-prong types. The jump is worth it when you build custom-length patch leads for 1 Gbps runs up to 100 m or 10 Gbps links limited to 35 to 55 m.

Check your crimper and cable specs

You need a pass-through capable RJ45 crimper, sold separately, to terminate these plugs. Confirm your cable outer diameter falls between 0.93 mm and 1.04 mm and that the conductor gauge matches the supported ranges. These connectors are unshielded, so they are not suited for installations that require shielded Cat6a or Cat7 cabling.

Highlights

  • Pass-through design lets you verify wire order before crimping
  • Gold-plated phosphor-bronze contacts resist oxidation for reliable 10 Gbps links
  • Supports 24–26 AWG solid or stranded cable and 23 AWG solid Cat6
  • UL-listed flame-retardant housing meets safety requirements for office and home use
  • 50 connectors per pack with included operating instruction for quick DIY termination

Specifications

BrandVCE
TypeEthernet
Cat6
Connector ACat6 Unshielded
ColorTransparent
ShieldedUnshielded
FeaturesUp to 10 Gbps 250MHz transmission, Pass-through, Unshielded, UTP,

Questions about this item

What cable outer diameter and AWG range do these 50 Cat6 pass-through plugs accept?

They accept 24 to 26 AWG solid or stranded cable with an outer diameter of .93 mm to 1.04 mm; 23 AWG solid Cat6 cable is also supported.

Which crimper is required for the pass-through design and what is the key installation step?

An end pass-thru crimper is required; the key step is letting the wires pass completely through the plug so twists reach the contacts before crimping and trimming.

How often should the gold-plated contacts be inspected or the connectors replaced in a typical installation?

The phosphor bronze contacts with gold plating resist oxidation; no scheduled replacement is needed unless physical damage or corrosion appears during routine visual checks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.