We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel ceiling fan downrod extension, 36 inch length, 0.75 inch diameter

Vaxcel

Vaxcel 2266KK 36 in. Black Steel Ceiling Fan Downrod Extension

SKU CH-J10D-TXCEH

A 36 inch black steel downrod extension for 12 foot ceilings, 0.75 inch diameter, matches dark bronze finishes

  • typeFans
  • 36 in. rod fits 12 ft ceilings
  • 75 in. diameter steel resists bending
  • Black finish matches oil-rubbed bronze fans
  • Single rod per fan prevents weak joints
  • Check brand fit before installing

Black Steel Ceiling Fan Downrod Extension

This Vaxcel 2266KK extension rod lowers a ceiling fan by 36 inches using a 0.75 inch diameter steel shaft. The black finish coordinates with oil shale, oil rubbed bronze, oil burnished bronze, noble bronze, aged bronze and dark bronze fans. It is designed for rooms with 12 foot ceilings where the standard rod is too short.

Replaces standard downrod when ceiling height

The extension is not universally compatible with all brands, so verify fit before purchase. Downrods are not meant to be connected to each other; select the single correct length rather than joining multiple pieces. The jump is worth it only when the factory rod leaves the fan too high for effective airflow.

36 inch length suits 12 foot ceilings

Steel construction provides strength and durability for permanent installation. The fixed length handles the drop required for tall rooms but offers no adjustability beyond the chosen size. It runs out when the ceiling exceeds the height this single rod can address or when the fan brand uses a different mounting interface.

Highlights

  • 36 in. rod fits 12 ft ceilings
  • 75 in. diameter steel resists bending
  • Black finish matches oil-rubbed bronze fans
  • Single rod per fan prevents weak joints
  • Check brand fit before installing

Specifications

BrandVAXCEL
typeFans

Questions about this item

What diameter ceiling fan canopy or mounting bracket does the 0.75 in. downrod fit?

The rod has a 0.75 inch diameter and is designed for Vaxcel fans with matching black, oil-rubbed bronze or similar dark bronze finishes; it is not universally compatible with other brands.

How do you secure the 36 in. steel downrod to the fan motor housing without damaging the threads?

Thread the rod into the motor coupling by hand until snug, then tighten the set screw with a hex key; do not join multiple rods together as they are not designed to connect end-to-end.

When should the black steel downrod be inspected or replaced after installation on a 12 ft ceiling?

Check the finish and mounting hardware annually for corrosion or loosening; replace the rod if the black coating wears through or if any bending or thread damage is visible.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.