We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal bracket with screw holes converting a 2.5 inch drive to a 3.5 inch bay

Vantec

Vantec HDA-250M 2.5" to 3.5" Mounting Kit ssd accessory

SKU CH-ZWHQ-YRX81 MPN HDA-250M

Metal tray converts a 2.5" SATA drive to fit a 3.5" bay with universal screw holes

  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • SpecificationsDevice Support: SATA Hard Driver Device Size: 2.5" Material:
  • FeaturesEasily mount your 2.5" HDD or SSD onto your 3.5" drive bay U
  • Mount 2.5" drives in standard 3.5" bays
  • Metal construction adds rigidity for secure installation
  • Fits 9.5 mm, 12.5 mm and 15 mm drive heights
  • Universal holes align with most PC case layouts
  • RoHS compliant materials meet environmental standards

2.5" to 3.5" Drive Bay Adapter

The Vantec HDA-250M is a metal mounting kit that converts a single 3.5" drive bay to accept a 2.5" SATA hard drive or SSD. It supports drive thicknesses of 9.5 mm, 12.5 mm and 15 mm. The tray measures 120 x 102 x 15 mm and includes installation screws for a quick setup.

Suits SATA drive upgrades in desktop cases

This adapter suits builders adding a 2.5" SATA drive to a chassis that only offers 3.5" bays. Universal mounting holes align with most common PC cases. It is not for users needing to install a 3.5" drive, a 5.25" device or a 1.8" drive. Buyers requiring hot-swap capability or tool-less trays should look at other solutions.

Single 3.5" bay converts to one 2.5" slot

The kit provides exactly one 2.5" drive position inside a standard 3.5" bay width. No additional bays or 5.25" conversion are included. The metal construction adds minimal weight at approximately .35 oz. RoHS compliance confirms the materials meet restricted substance standards.

Highlights

  • Mount 2.5" drives in standard 3.5" bays
  • Metal construction adds rigidity for secure installation
  • Fits 9.5 mm, 12.5 mm and 15 mm drive heights
  • Universal holes align with most PC case layouts
  • RoHS compliant materials meet environmental standards

Specifications

BrandVANTEC
ModelHDA-250M
Conversion Tray1 x 2.5" Drive to 3.5" Bay
SpecificationsDevice Support: SATA Hard Driver
Device Size: 2.5"
Material: Metal
Dimensions: 120 x 102 x 15 mm
FeaturesEasily mount your 2.5" HDD or SSD onto your 3.5" drive bay
Universal mounting holes for most common PC case
Compatible with 9.5, 12.5, 15mm drives
Perfect for System Integrators and IT Professionals
Shipping weight0.12 kg
Package size194 × 136 × 34 mm

Questions about this item

Should I choose the metal tray for a 2.5" SATA SSD or a 3.5" hard drive?

The tray converts one 2.5" SATA drive to fit a standard 3.5" bay, so select it when you are installing a 2.5" SSD or hard drive into a desktop case.

What does the 15 mm height mean once the kit is installed in my PC?

The bracket is 15 mm thick and accepts drives up to 15 mm tall, so the combined stack stays within the usual 3.5" bay clearance.

Does the SATA interface limit the speed of the drive I mount in this adapter?

The kit is a passive metal bracket with no electronics, so it does not cap SATA transfer rates; the drive runs at its native SATA speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.