We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Valvoline AW 46 hydraulic fluid in a 5 gallon metal pail

VALVOLINE

VALVOLINE Hydraulic Fluid AW 46 5 Gal VV043

SKU CH-DD7Q-WHJC1

ISO VG 46 mineral hydraulic fluid in a 5‑gal pail, meeting DIN 51524 Pt. 2 for industrial stationary and mobile systems

  • ISO VG 46 viscosity suits industrial hydraulic systems
  • Viscosity index 106 maintains film strength across temperatures
  • Flash point 400 °F adds high-temperature safety margin
  • Pour point -39 °C ensures cold-start flow
  • Meets DIN 51524 Part 2 and major OEM specifications

Industrial Hydraulic Fluid

Valvoline Hydraulic Fluid AW 46 is a mineral-base oil formulated for industrial stationary and mobile hydraulic systems. The ISO VG 46 grade suits equipment that specifies this viscosity range. Supplied in a 5 gal pail, it meets DIN 51524 Pt. 2 and several OEM approvals.

Thermal and Power Characteristics

The fluid has a viscosity index of 106, a flash point of 400 Degrees F and a pour point of -39 Degrees C. Specific gravity measures .875 at 15.6 Degrees C. These properties support consistent flow and film strength across wide temperature swings in normal service.

Build Integration

The 5 gal container provides a practical fill volume for reservoir top-offs or complete changes. Compatibility with Eaton Brochure, GM LS-2, MAG IAS, Parker Hannifin HF-0 and U. S. Steel specifications reduces the need for multiple fluid stocks. Not suited for systems requiring an NSF-rated fluid or a different ISO viscosity grade.

Highlights

  • ISO VG 46 viscosity suits industrial hydraulic systems
  • Viscosity index 106 maintains film strength across temperatures
  • Flash point 400 °F adds high-temperature safety margin
  • Pour point -39 °C ensures cold-start flow
  • Meets DIN 51524 Part 2 and major OEM specifications

Specifications

BrandValvoline

Questions about this item

How do I add this ISO 46 hydraulic oil to my system without introducing air?

Clean the fill port, then pour the fluid slowly into the reservoir while the pump is off; allow bubbles to rise before cycling the system to purge remaining air.

What replacement interval should I plan for this mineral-base fluid?

Monitor viscosity and contamination at regular service intervals; replace when analysis shows viscosity drift beyond the 106 index range or when water and particle counts exceed system limits.

At what temperature does sustained operation risk fluid breakdown?

The pour point is -39 °C and the flash point is 400 °F; continuous reservoir temperatures near the upper end reduce oxidation life and signal a need for cooler capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.