Value Brand
Value Brand 24W701 Hydraulic Reservoir 5 gal Steel
A 5-gallon steel hydraulic reservoir with removable cover, breather cap and 1-inch NPT suction port
- 5 gallon capacity suits mid-size hydraulic systems
- Vertical mounting orientation fits power-unit installations
- Removable cover with breather cap allows easy inspection
- 11 gauge steel construction with black painted finish resists corrosion
- Buna-N gasket and NPT ports ensure reliable sealing
Hydraulic Reservoir 5 gal Steel
This hydraulic reservoir holds five gallons of fluid and is built from eleven-gauge steel with a black painted finish. It is designed for vertical mounting on power units in industrial and mobile hydraulic systems. The removable cover simplifies inspection and cleaning during routine maintenance.
Vertical Mounting and Port Layout
The tank measures ten point three seven five inches long by ten point three seven five inches wide by sixteen point three seven five inches high. A one inch NPT suction port and a half inch NPT return port are provided along with a half inch NPT drain plug. A breather cap and Buna-N gasket are included to seal the removable cover.
Included Cover Breather Cap and Drain Plug
The removable cover comes factory fitted with a breather cap so the reservoir can vent without additional parts. The Buna-N gasket creates a reliable seal when the cover is reinstalled after service. The half inch NPT drain plug allows fluid changes without removing the tank from its mounting position.
Highlights
- 5 gallon capacity suits mid-size hydraulic systems
- Vertical mounting orientation fits power-unit installations
- Removable cover with breather cap allows easy inspection
- 11 gauge steel construction with black painted finish resists corrosion
- Buna-N gasket and NPT ports ensure reliable sealing
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What does the 1 in NPT suction port limit in practice?
The 1 in NPT suction port restricts maximum flow to what that fitting size can pass, so pump inlet plumbing must match this thread to avoid cavitation.
What clearance does the 10.375 in square footprint and 16.375 in height require for vertical power-unit mounting?
Allow at least 10.375 in by 10.375 in of floor space plus 16.375 in of vertical clearance, plus extra room for the removable cover and breather cap access.
How is the Buna-N gasket installed on the removable cover, and what step is often missed?
Seat the Buna-N gasket evenly in the cover groove, torque the cover bolts in a cross pattern, and re-check torque after the first heat cycle — the re-torque step is frequently skipped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
