We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber 1 qt bottle of 20W-50 conventional engine oil

VALVOLINE

VALVOLINE Conventional Engine Oil 20W-50 1 qt Amber 798152

SKU CH-J420-VCDWF

Conventional 20W-50 engine oil for gasoline motorcycles, detergent-fortified to protect at up to 220 °F and flow down to -30 °F

  • Conventional formulation protects gasoline motorcycle engines
  • SAE 20W-50 viscosity suits wide temperature ranges
  • Detergent additives help keep internals clean
  • Operates from -30 °F to 220 °F
  • Amber colour for easy level checks

Engine Oil for Four-Stroke Motorcycles

Valvoline Conventional Engine Oil 20W-50 is formulated for gasoline-powered, four-stroke motorcycle engines. The amber-coloured lubricant comes in a one-quart bottle. It meets API standards and contains detergent additives to help keep internal components clean. This product suits riders seeking a conventional base oil for general use.

Check Viscosity Grade and Engine Compatibility

Confirm your motorcycle manufacturer specifies SAE 20W-50 viscosity before ordering. The oil operates between minimum and maximum temperatures of -30 and 220 degrees Fahrenheit respectively. Ensure the engine requires a conventional formulation rather than a synthetic or synthetic blend. Verify the API standard listed in your service manual matches this product.

Fits Standard Quart Bottle Storage and Fill Points

The one-quart bottle fits typical onboard tool kits or garage shelves for top-offs between changes. Its pour point of -16.6 degrees Fahrenheit allows flow during cold starts. A flash point of 456.8 degrees Fahrenheit indicates stability at high operating temperatures. The detergent package helps suspend contaminants until the next drain interval.

Highlights

  • Conventional formulation protects gasoline motorcycle engines
  • SAE 20W-50 viscosity suits wide temperature ranges
  • Detergent additives help keep internals clean
  • Operates from -30 °F to 220 °F
  • Amber colour for easy level checks

Specifications

BrandVALVOLINE

Questions about this item

What comes in the 1 qt bottle and is anything else needed for an oil change?

The bottle contains 1 qt of SAE 20W-50 conventional engine oil with detergent additives. A suitable oil filter and drain plug washer must be purchased separately to complete the service.

When should I choose the 20W-50 grade over other viscosities?

Choose 20W-50 for gasoline motorcycle four-stroke engines where the manufacturer specifies this viscosity, especially in ambient temperatures up to 220 °F operating range.

What does the flash point of 456.8 °F mean for daily riding?

The 456.8 °F flash point indicates the oil resists vaporisation at high engine temperatures, helping maintain film strength during extended operation at up to 220 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.