We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red painted brass wye valve with lever handle

Value Brand

Value Brand WYE Valve 2-1/2 NST x 1-1/2 NST Brass

SKU CH-6FJN-ND3ZT

Splits one 2½″ fire-hose stream into two 1½″ outlets, rated to 300 psi with brass ball, bronze body and stainless lever

  • TypeOther
  • Divides single flow into two outlets with Wye body style
  • Brass ball and bronze body handle up to 300 psi pressure
  • 304 stainless steel lever operates from 32 to 176 degrees F
  • 11 1/4 inch overall length fits standard fire hose connections
  • California Proposition 65 warning for cancer and reproductive harm chemicals

Application and Use

This Wye valve splits a single 2-1/2 inch NST inlet into two 1-1/2 inch NST male outlets for fire hose distribution. It serves fire protection professionals and industrial facilities requiring reliable flow division in suppression systems. The brass ball and bronze body handle water service within the specified pressure range. It is not suited for applications needing more than two discharge ports or different thread standards.

Pressure and Temperature Range

The valve operates at a maximum pressure of 300 psi across a temperature span of 32 to 176 degrees Fahrenheit. Rubber seals and a brass ball maintain sealing integrity through this range during normal fire suppression use. The lever handle allows manual control without excessive force under rated conditions. Performance outside these documented limits has not been verified.

Materials and Compliance

A red painted finish covers the bronze body while the lever handle uses 304 stainless steel for corrosion resistance. California Proposition 65 warnings apply because the product contains chemicals identified by the state as causing cancer and reproductive harm. No additional accessories or software are bundled with this mechanical valve. Installation relies on standard NST threading without proprietary tools.

Highlights

  • Divides single flow into two outlets with Wye body style
  • Brass ball and bronze body handle up to 300 psi pressure
  • 304 stainless steel lever operates from 32 to 176 degrees F
  • 11 1/4 inch overall length fits standard fire hose connections
  • California Proposition 65 warning for cancer and reproductive harm chemicals

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I install the 2-1/2 NST female inlet on a fire hose, and what step is often missed?

Thread the female NH inlet onto the male hose coupling by hand, then tighten with a spanner wrench; the step often missed is checking the rubber seal seats fully before pressurising.

Which component of the valve will need replacement after repeated cycling?

The rubber seal between the brass ball and bronze body wears first; keep a spare seal kit matched to the 300 psi rating for quick replacement.

What pressure or temperature limit is reached first during prolonged firefighting use?

The 300 psi maximum pressure rating is the limiting factor; sustained operation above this pressure risks seal extrusion before the 176 °F temperature ceiling is hit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.