Value Brand
Value Brand Indicator Light Raised Head Red 12MM 20C854
Red neon panel indicator with 12 mm mounting, 120 V AC supply and IP40 rating
- Raised-head design simplifies panel mounting
- 12 mm cutout fits standard half-inch openings
- Red neon glow provides clear status indication
- 120 V AC operation suits mains-powered equipment
- 25 000-hour average life reduces replacement frequency
Panel-Mount Indicator Light
The Zoro Select 20C854 is a raised-head neon indicator light designed for 120V AC panel-mount applications. It features a red polycarbonate lens, a nylon body with a stainless steel bezel, and 6-inch wire leads for electrical connection. The unit carries a cULus listing and an IP40 rating, making it suitable for general-purpose industrial panels.
Suited for 120V AC control panels
This light fits panels with a 1/2-inch mounting diameter and a thickness between .030 and .093 inches. It draws 2 mA and offers an average life of 25,000 hours. Buyers needing a low-voltage DC indicator, a flush-mounted lens style, or a higher ingress protection rating such as IP65 should look elsewhere.
120V AC neon voltage rating
The single specification that determines compatibility is the 120V AC neon voltage rating. The light will not operate on DC circuits or lower AC voltages. Confirm the supply voltage matches this rating before installation.
Highlights
- Raised-head design simplifies panel mounting
- 12 mm cutout fits standard half-inch openings
- Red neon glow provides clear status indication
- 120 V AC operation suits mains-powered equipment
- 25 000-hour average life reduces replacement frequency
Specifications
| Brand | Zoro Select |
|---|
Questions about this item
How bright is the 120V AC neon indicator once it is wired into a panel?
It draws 2 mA and is rated for an average life of 25,000 hours, so the light output stays consistent for years of continuous use.
What does the IP40 rating actually protect against in a shop environment?
IP40 blocks solid objects larger than 1 mm but offers no water protection, so it suits dry indoor panels only.
Will the 12 mm raised head fit my existing 1/2 inch panel cut-out?
Yes, the 12 mm mounting diameter matches a 1/2 inch hole and the bezel clamps panels from .030 in to .093 in thick.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



