We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminum spin-on hydraulic filter with 3/4 inch NPT ports

Value Brand

Value Brand Hydraulic Spin-on Filter 25 Micron 15 GPM 3/4 In

SKU CH-SR2V-BKQW6

Hydraulic spin-on filter rated 25 micron with 15 gpm flow, 3/4 inch NPT ports, and 200 psi maximum pressure

  • 25 micron rating captures fine contaminants
  • 15 GPM flow supports steady hydraulic operation
  • 200 psi max pressure handles demanding systems
  • 25 psi bypass valve prevents filter collapse
  • 180 °F max temperature suits high-heat environments

25 Micron Hydraulic Spin-on Filter

This hydraulic spin-on filter uses paper media inside an aluminium body to remove particles down to 25 microns. It is rated for a maximum flow of 15 gallons per minute and suits systems that require clean fluid at moderate pressures. The unit is designed for inline installation on hydraulic circuits.

Check Port Threads and Pressure Rating

Verify that your circuit uses 3/4 inch female NPT ports on both inlet and outlet before ordering. Confirm the system pressure does not exceed 200 psi and that the 25 psi bypass setting matches your design requirements. The gauge port uses 1/8 inch NPT if pressure monitoring is needed.

Sustained Operation at 180 Degrees F

The filter is rated for continuous operation at up to 180 degrees Fahrenheit without degradation of the paper media. Under steady flow the 25 psi bypass valve opens only when the element loads with contaminants, maintaining filtration during extended duty cycles. The aluminium body resists corrosion during long service intervals.

Highlights

  • 25 micron rating captures fine contaminants
  • 15 GPM flow supports steady hydraulic operation
  • 200 psi max pressure handles demanding systems
  • 25 psi bypass valve prevents filter collapse
  • 180 °F max temperature suits high-heat environments

Specifications

BrandZORO SELECT

Questions about this item

Does the filter come with any gaskets or mounting hardware, or do I need to buy them separately?

The filter ships as a complete spin-on assembly with its sealing gasket already installed; no extra gaskets or mounting bolts are required.

How do I decide between the 25-micron rating and a finer or coarser option for my system?

Choose the 25-micron version when your hydraulic circuit specifies that cleanliness level; finer media would restrict flow at the 15 gpm rating, while coarser media would not meet the particle-count target.

What does the 15 gpm flow rating actually deliver when the filter is installed in a running circuit?

At 15 gpm the element operates at its rated capacity with a 25 psi bypass setting and stays within the 200 psi maximum pressure limit up to 180 degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.