We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass ball valve with butterfly handle and strainer screen

Value Brand

Value Brand Ball Valve Brass 1/2 NPT F x F

SKU CH-13MF-WFYK4

A forged brass ball valve with stainless steel strainer, full port design, and 600 psi pressure rating for 1/2 inch NPT connections

  • TypeOther
  • Full-port design maximizes flow efficiency
  • Forged brass body withstands 600 psi working pressure
  • Operates reliably from -40°F to 400°F
  • Blowout-proof stem enhances operational safety
  • Stainless steel screen provides integrated filtration

Brass Ball Valve with Strainer

This forged brass valve combines a full-port ball valve and a stainless steel strainer in a single 3.39 in body. It is suited for plumbing installers who need shut-off and debris filtration at the same connection point.

600 psi CWP Pressure Limit

The valve is rated for 600 psi cold working pressure, so it suits typical residential and light commercial water lines. It must not be used in systems where pressure can exceed this rating or where pressure spikes are uncontrolled.

-40 °F to 400 °F Temperature Range

The EPDM seals and PTFE seats handle continuous operation from -40 °F to 400 °F, covering hot water, chilled water and low-pressure steam. It is not intended for sustained service above 400 °F or for aggressive chemical media that attack EPDM.

Highlights

  • Full-port design maximizes flow efficiency
  • Forged brass body withstands 600 psi working pressure
  • Operates reliably from -40°F to 400°F
  • Blowout-proof stem enhances operational safety
  • Stainless steel screen provides integrated filtration

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

Is the 1/2 inch NPT female-to-female size the right choice for my residential plumbing?

The 1/2 inch NPT female threads on both ends match standard residential copper or steel pipe fittings, and the full-port design maintains flow without restriction.

What does the 600 psi CWP rating mean when the valve is installed in a hot water line?

The 600 psi cold working pressure rating applies at ambient temperature; at the maximum 400 °F operating limit the allowable pressure is lower, so verify your system pressure against the manufacturer's pressure-temperature chart.

Does the NPT thread standard limit the seal reliability compared to compression fittings?

NPT tapered threads create a metal-to-metal seal that is reliable when properly sealed with PTFE tape or pipe dope, and the blowout-proof stem adds safety against stem ejection under pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.