We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized carbon steel pipe nipple, 2 ft TBE threaded ends, Sch 40

Value Brand

Value Brand 565-240GR 1" MNPT x 2 ft TBE Carbon Steel Pipe Nipple Sch 40

SKU CH-S22W-AGSZX

A 2 ft galvanised carbon-steel pipe nipple with 1" male NPT threads and Schedule 40 wall thickness

  • Galvanised carbon steel resists corrosion in plumbing systems
  • Schedule 40 wall thickness handles standard pressure requirements
  • 2 ft length suits common pipe run distances
  • 1" MNPT threads connect directly to female fittings
  • TBE ends allow straightforward threaded installation

Pipe nipple for plumbing connections

The Value Brand 565-240GR is a carbon steel pipe nipple designed for joining two female-threaded fittings in plumbing systems. It suits installers who need a short, rigid connector for water, gas or oil lines in residential or commercial pipework.

1-inch MNPT threads on both ends

The single specification that determines fit is the 1-inch male NPT thread at each end, cut to Schedule 40 wall thickness. Only components with matching 1-inch female NPT ports will seal correctly on this nipple.

Threaded installation with sealant required

Installation is straightforward: apply thread sealant or tape to the male threads and tighten into the female fittings using a pipe wrench. The most common issue is leaks caused by insufficient sealant or cross-threading during assembly.

Highlights

  • Galvanised carbon steel resists corrosion in plumbing systems
  • Schedule 40 wall thickness handles standard pressure requirements
  • 2 ft length suits common pipe run distances
  • 1" MNPT threads connect directly to female fittings
  • TBE ends allow straightforward threaded installation

Specifications

BrandZoro Select

Questions about this item

What does Schedule 40 mean for this pipe nipple once installed?

Schedule 40 defines the wall thickness for 1" nominal pipe, giving a pressure rating suitable for standard water, air and oil lines at typical shop pressures.

How does the 1" MNPT thread seal in practice?

The 1" male NPT taper threads seal when tightened with PTFE tape or pipe dope, creating a metal-to-metal joint that resists vibration and thermal cycling.

What clearance is needed to thread this 2 ft nipple into a fitting?

You need straight access equal to the 2 ft length plus room for a pipe wrench on the hex section to make the connection.

More in Hoses, Pipes & Tubing

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.