We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two clear rigid PVC tubes 17mm ID 20mm OD 0.5m long

Unique-Bargains

Unique-Bargains Rigid Round Tubing Clear 17mm ID x 20mm OD 0.5M 2pcs

SKU CH-0X91-WHGG5

Clear PVC tubing with 17 mm inner and 20 mm outer diameter, supplied in two 0.5 m lengths for fluid or cable routing

  • Clear PVC tube resists impact for repeated use
  • 17 mm inner diameter fits standard fittings
  • 5 mm wall thickness adds structural rigidity
  • 5 metre length suits compact installations
  • Two pieces included for immediate project start

Rigid PVC Tubing for Custom Builds

This clear PVC tubing is cut to 0.5 metre lengths with a 17 mm inner diameter and 20 mm outer diameter. The 1.5 mm wall thickness keeps the tube rigid while remaining easy to cut and bend for routing. Two pieces are supplied, giving a total run of 1 metre for liquid-cooling loops or custom plumbing projects.

Check Inner Diameter and Fitting Compatibility

Verify that your compression fittings, barbs or push-fit connectors accept a 17 mm bore before ordering. The outer diameter of 20 mm determines the minimum bend radius and the space needed inside channels or bulkheads. Ensure your loop design can accommodate the fixed 0.5 metre straight sections without requiring tighter curves than the rigid wall allows.

Replaces Flexible Tubing When Rigidity Is Needed

Switch from soft tubing when you need fixed routing that holds its shape without kinking or collapsing under pump pressure. The PVC material resists common coolants, acids and alkalis, making the jump worthwhile for permanent installations or display loops where clean lines matter. It is not suited for builds that require frequent disassembly or tight-radius bends.

Highlights

  • Clear PVC tube resists impact for repeated use
  • 17 mm inner diameter fits standard fittings
  • 5 mm wall thickness adds structural rigidity
  • 5 metre length suits compact installations
  • Two pieces included for immediate project start

Specifications

BrandUnique Bargains

Questions about this item

What is included in the package and do I need extra fittings for 17mm ID tubing?

The package contains two pieces of clear PVC rigid round tubing, each 0.5M long with 17mm ID and 20mm OD. Fittings or clamps for the 17mm inner diameter are not included and must be purchased separately.

Which length version should I choose for a custom water-cooling loop?

The tubing is supplied as two 0.5M (1.64ft) lengths. Buy additional 2-piece packs to reach the total loop length you need.

What does the 1.5mm wall thickness mean for bending and kink resistance in a real build?

The 1.5mm (0.06in) wall gives the tube enough rigidity to hold shape while still allowing heat-assisted bends without collapsing the 17mm ID bore.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.