Baldwin 22444786 Hand Rivet Nut Setter Kit
Drains condensate from mini-split or window AC units using a .47 in. hose with .6 in. connector, clamp and elbow joint included
- End ConnectionsNPT
- Color/FinishYellow
- Universal fit for most AC units with .6 inch connector
- Leak-proof rubber ring prevents water damage to walls and floors
- Durable transparent PVC resists aging, deformation and kinking
- Flexible 3 ft or 10 ft hose lengths direct condensation safely away
- Simple clamp-on installation secures hose to AC drain outlet
Baldwin Hand Rivet Nut Setter Kit
The Baldwin 22444786 kit provides a dedicated air-conditioner drain hose assembly for mini-split and window units. It targets installers and homeowners who need a ready-to-fit condensate removal solution.
Included connector clamp and hose length choice
The package supplies a barbed elbow connector, a worm-drive clamp and either 3 ft or 10 ft of transparent PVC tubing. The built-in rubber ring on the connector seats against the unit's drain port to stop leaks, while the clamp locks the hose onto the barb for a secure joint.
0.6 inch bend-pipe interface diameter
The elbow connector accepts a 0.6 in drain-port opening, and the hose bore measures 0.47 in. Verify the port size on the equipment before purchase; units with larger or smaller outlets will not seal with this kit.
Highlights
- Universal fit for most AC units with .6 inch connector
- Leak-proof rubber ring prevents water damage to walls and floors
- Durable transparent PVC resists aging, deformation and kinking
- Flexible 3 ft or 10 ft hose lengths direct condensation safely away
- Simple clamp-on installation secures hose to AC drain outlet
Specifications
| End Connections | NPT |
|---|---|
| Color/Finish | Yellow |
| Brand | Baldwin |
| Model | Hand Rivet Nut Setter Kit |
| Part Number | 22444786 |
Questions about this item
Will the PVC hose need periodic replacement due to aging or kinking?
The transparent PVC resists aging, deformation and kinking, maintaining structural integrity during extended use, so frequent replacement is unlikely.
What limits continuous drainage performance — the .47 in. inner diameter or the .6 in. connector?
The .47 in. hose bore is the narrower passage, so it sets the maximum flow rate before back-pressure builds up.
Does the hose-clamp connection stay leak-free when the unit runs all day?
A built-in rubber ring on the .6 in. elbow joint seals against the clamp, preventing condensation leaks during non-stop operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
VEVOR 304 Stainless Steel Slide Anchor Hook 3/8-5/8" Rope 3700 lbs
- Other Appliances
visiPower Drain Inspection Camera 7" Monitor 30m Cable 512Hz Transmitter 22mm IP68 1000TVL 12 LED
- Drain Guns & Kits



