We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black nylon cleats with stainless screws nuts and washers

Unique-Bargains

Unique-Bargains 10pcs 100mm Black Nylon Boat Cleats with Hardware

SKU CH-M219-ERX0H

Set of ten 100 mm black nylon cleats with stainless steel screws, nuts and washers for securing rope on boats, kayaks or docks

  • Secure mooring with corrosion-resistant nylon and stainless hardware
  • Ten cleats plus twenty screws nuts and washers included
  • Four-inch black cleats fit kayaks canoes and small boats
  • Saltwater durability from quality nylon and stainless steel fasteners
  • Simple installation using supplied M4 hardware and 28 mm hole spacing

100 mm Nylon Boat Cleats for Mooring

This pack contains ten black nylon cleats measuring 100 mm long with a 28 mm hole centre distance. They are designed to secure dock lines on boats, yachts, kayaks and canoes. Stainless steel screws, nuts and washers are included for immediate installation.

Replacing Worn or Missing Deck Hardware

The cleats serve as direct replacements for corroded or broken mooring fittings on small craft. The upgrade is worthwhile when existing hardware shows pitting, cracking or loose fasteners in saltwater environments. Each unit provides a 4 mm mounting hole sized for the supplied M4 hardware.

Simple Through-Bolt Installation on Flat Surfaces

Installation requires drilling two 4 mm holes per cleat at 28 mm centres and tightening the supplied nuts and washers from the underside. The low 14 mm profile keeps deck obstructions minimal while the black nylon resists UV and saltwater corrosion. No specialised tools beyond a basic wrench or screwdriver are needed.

Highlights

  • Secure mooring with corrosion-resistant nylon and stainless hardware
  • Ten cleats plus twenty screws nuts and washers included
  • Four-inch black cleats fit kayaks canoes and small boats
  • Saltwater durability from quality nylon and stainless steel fasteners
  • Simple installation using supplied M4 hardware and 28 mm hole spacing

Specifications

BrandUnique Bargains

Questions about this item

What size screws and hole spacing do these 100 mm cleats need for mounting?

Each cleat uses two M4 × 0.7 screws through 4 mm holes spaced 28 mm centre-to-centre, and the pack includes 20 screws, 20 nuts and 20 washers.

Which tool fits the M4 hardware and what is the common overtightening mistake?

A 7 mm socket or spanner fits the M4 nuts; the error is cranking them down until the nylon base cracks instead of snugging them just enough to hold the cleat firm.

How long before the black nylon or stainless hardware needs replacement in salt water?

The nylon and stainless steel are rated for corrosion resistance in seawater, so under normal mooring loads they typically last several seasons before UV wear or thread galling requires a swap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.