We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC inline ball valve with teal tee handle and threaded ends

Value Brand

Value Brand 3/4" FNPT PVC Ball Valve Inline

SKU CH-7XTA-GND4T

Inline PVC ball valve with 3/4" FNPT connections, full-port design and 150 psi rating for water systems

  • TypeOther
  • Full-port design ensures unrestricted water flow
  • PVC body resists corrosion for long service life
  • FKM seals and PTFE seats provide reliable shut-off
  • Tee handle allows quick manual operation
  • Rated to 150 psi for standard pressure systems

3/4" FNPT PVC Ball Valve Inline

This quarter-turn valve controls water flow in residential and light-commercial plumbing. The straight, one-piece PVC body fits 3/4 inch female NPT connections and uses a full-port PVC ball with PTFE seats and FKM seals. A tee handle provides manual two-way operation without tools.

150 psi operating pressure with FKM and PTFE seals

The valve is rated for a maximum operating pressure of 150 psi in water service. PVC construction and the specified seal materials resist corrosion and scale build-up under normal supply pressures. No steam or combustible-gas ratings are published, so the valve should be limited to cold- or hot-water lines within the stated pressure range.

Full-port design maintains flow during extended use

The full-port ball matches the nominal pipe bore, minimising restriction when the valve remains open for long periods. PTFE seats and FKM seals are selected for chemical compatibility with potable water, reducing the risk of seat deformation or seal degradation over sustained duty cycles. California Proposition 65 warnings apply to chemicals present in the product.

Highlights

  • Full-port design ensures unrestricted water flow
  • PVC body resists corrosion for long service life
  • FKM seals and PTFE seats provide reliable shut-off
  • Tee handle allows quick manual operation
  • Rated to 150 psi for standard pressure systems

Specifications

BrandZoro Select
TypeOther

Questions about this item

How do I install the 3/4 in FNPT PVC ball valve inline and what step is often missed?

Thread the 3/4 in FNPT ends onto matching male pipe threads using PTFE tape on the male threads only; the step often missed is tightening by hand plus one to two turns with a strap wrench to avoid cracking the PVC body.

What maintenance or replacement will the 3/4 in FNPT PVC ball valve inline need later?

The PTFE seats and FKM seals can wear or harden over time; if the valve drips when closed or the tee handle becomes stiff, replace the entire one-piece valve because internal parts are not serviceable.

What limit appears first on the 3/4 in FNPT PVC ball valve inline under sustained use?

The 150 psi maximum operating pressure is the first limit; sustained pressure above this rating or repeated pressure spikes will deform the PVC body and cause leakage at the seats.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.