We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass inline ball valve with lever handle, 1/2 inch FNPT threads

Value Brand

Value Brand 1/2" FNPT Brass Ball Valve Inline

SKU CH-PKG5-H6MZ0

A brass ball valve with full-port flow for air, oil, steam and water, rated to 600 psi and 29.9 in Hg vacuum

  • TypeOther
  • Full-port design maintains unrestricted flow
  • Brass body with chrome-plated ball resists corrosion
  • 600 psi operating pressure suits demanding lines
  • 150 psi steam rating handles high-temperature media
  • 9 in Hg vacuum rating ensures tight seal

1/2" Brass Ball Valve for Air Oil Steam Water

This 1/2-inch FNPT brass ball valve handles air, oil, steam and water in residential and light-commercial plumbing. The straight two-piece body uses a full-port chrome-plated brass ball rated for 600 psi operating pressure and 150 psi steam pressure. It carries a vacuum service rating of 29.9 in Hg and is not 3-A compliant. California Proposition 65 warnings apply for cancer and reproductive harm.

Installation and Common Issues

The valve threads onto standard 1/2-inch FNPT connections using common pipe-sealing methods. Its non-locking handle provides manual two-way control without special tools. Installers should verify that system pressure stays within the 600 psi limit and that steam pressure does not exceed 150 psi. Over-tightening can damage the brass threads and the two-piece body joint.

Suitable Uses and Limitations

This valve suits plumbers and maintenance crews needing a full-port brass shut-off for water, oil, air or low-pressure steam lines. It is not intended for combustible gas service, high-purity sanitary systems requiring 3-A compliance, or applications that demand a locking handle for safety lockout. Buyers needing gas-rated or lockable valves should select a different model.

Highlights

  • Full-port design maintains unrestricted flow
  • Brass body with chrome-plated ball resists corrosion
  • 600 psi operating pressure suits demanding lines
  • 150 psi steam rating handles high-temperature media
  • 9 in Hg vacuum rating ensures tight seal

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I verify the valve is operating correctly after installation?

Pressurise the line up to 600 psi for air, oil or water, or 150 psi for steam, then cycle the handle fully open and closed while checking for leaks at the 1/2 in FNPT joints and confirming full shut-off.

What comes in the box and what must I supply separately?

The package contains the two-piece brass ball valve with chrome-plated brass ball and non-locking handle; you must provide 1/2 in FNPT fittings, pipe thread sealant and any required piping.

Which valve version should I select for my pressure requirements?

Choose this model when your system operates at or below 600 psi for air, oil or water, or 150 psi for steam, and requires a full-port 1/2 in straight-pattern valve.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.