Valiant Power
Valiant Power Metered PDU 208-250V 50A L6-50P 4×C13 4×C19 1U Vertical 12000W
Metered rack PDU delivers 12000W through four C13 and four C19 outlets from a 50A L6-50P input with 20000V surge protection
- 20,000 volt surge protection shields connected equipment from dangerous voltage spikes
- Real-time metering displays current draw so operators can balance loads and avoid overloads
- Eight locking outlets (four C13 and four C19) power diverse servers and high-density gear from one unit
- NEMA L6-50P input delivers up to 50 A at 200-250 V for 12,000 W total capacity
- Switchless design with built-in breakers prevents accidental shutdowns and protects against overloads
Metered PDU for 208–250 V environments
This metered power distribution unit delivers single-phase AC power at 200, 208, 230, 240 or 250 volts with a 50 A maximum input. It suits high-density IT racks, networking gear, telecom equipment, audio/video systems and crypto-mining rigs that need basic monitored distribution.
Thermals noise and power draw
The unit handles up to 12000 watts through a NEMA L6-50P plug on a 2-metre cord. Built-in circuit breakers protect connected loads from dangerous overloads, while the switchless design prevents accidental shutdowns. Surge protection rated at 20000 volts guards equipment against transient spikes.
Build fit and constraints
Eight rear outlets provide four C13 and four C19 sockets for mixed device cables. The all-metal 1U housing mounts vertically in a standard 19-inch rack and can face front or rear. Buyers needing more than eight outlets or a different input plug will require an additional or alternative PDU.
Highlights
- 20,000 volt surge protection shields connected equipment from dangerous voltage spikes
- Real-time metering displays current draw so operators can balance loads and avoid overloads
- Eight locking outlets (four C13 and four C19) power diverse servers and high-density gear from one unit
- NEMA L6-50P input delivers up to 50 A at 200-250 V for 12,000 W total capacity
- Switchless design with built-in breakers prevents accidental shutdowns and protects against overloads
Specifications
No published specifications for this item yet.
Questions about this item
How is the PDU mounted vertically in a 1U rack space?
The all-metal housing is reversible and installs in 1U of an EIA-standard 19-inch rack; orient the unit so the L6-50P input cord and the eight rear outlets face the desired direction before securing the mounting brackets.
What maintenance does the 20,000-volt surge protection require over time?
The surge-protection components are not user-serviceable; if a large transient event occurs the internal protection may sacrifice itself, so plan to replace the entire PDU after any known surge incident.
At what load does the built-in circuit breaker trip during sustained operation?
The breaker is rated for 50 A maximum input current; continuous loads above 12,000 W at 208-250 V will cause the breaker to open and cut power to all four C13 and four C19 outlets.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114814BTC
In stock
