We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with threaded nuts and spacers for M12x1.5 applications

V-Project Inc

V-Project Inc Wheel Stud Installer Kit Pontiac Grand AM 1988-2005 M12x1.5 Chrome

SKU CH-YZ8P-G4V51

Installs M12x1.5 wheel studs on Pontiac Grand AM 1988-2005 with included chrome tools

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Pontiac Grand AM 1988-2005 fitment
  • M12 x 1.5 thread matches factory wheel studs
  • Chrome finish resists corrosion during repeated use
  • 20 mm x 24.9 mm x 43.15 mm compact dimensions suit tight hub spaces
  • Pin-stud compatible design speeds professional wheel installation

Wheel Stud Installer Kit for Pontiac Grand AM

This new wheel-stud installer kit fits Pontiac Grand AM models from 1988 to 2005 and uses an M12 x 1.5 thread size. It is designed for residential garage use and targets pin-type wheel studs. The chrome-finished components include the tools and nuts required for the installation job.

Behaviour under sustained use

The kit supplies the mechanical leverage needed to press studs into hubs without damaging threads during repeated installations. Chrome surfaces resist corrosion when the tools are stored between seasonal tyre changes. Dimensions of 20 mm by 24.9 mm by 43.15 mm keep the driver compact for tight brake clearances.

M12 x 1.5 thread specification

The single decisive figure is the M12 x 1.5 thread pitch, which must match the vehicle hub exactly. Builders working on vehicles with a different thread size or on press-in studs that are not pin-type cannot use this kit. Always verify the hub specification before purchase.

Highlights

  • Designed for Pontiac Grand AM 1988-2005 fitment
  • M12 x 1.5 thread matches factory wheel studs
  • Chrome finish resists corrosion during repeated use
  • 20 mm x 24.9 mm x 43.15 mm compact dimensions suit tight hub spaces
  • Pin-stud compatible design speeds professional wheel installation

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

Does the M12x1.5 thread size require any special lubrication or torque setting during installation?

The kit uses an M12x1.5 thread size. Apply a light anti-seize compound to the threads and torque to the vehicle manufacturer's specification for this thread diameter.

What tools beyond the installer kit are needed to press the new studs into the hub?

You will need a standard lug wrench or impact socket to drive the installer's forcing screw, plus a breaker bar for initial hub nut removal.

Will the 20 mm by 24.9 mm by 43.15 mm dimensions fit the hub flange on a 1998 Pontiac Grand AM without modification?

The kit is listed for the 1988 to 2005 Grand AM, so the 20 mm, 24.9 mm and 43.15 mm stud dimensions match the original hub flange on the 1998 model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.