Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081127BTC
In stock
V-Project Inc
V-Project Inc 50mm Extended Wheel Stud M12x1.5 10pcs Gold Scion xA 2004-2006
Grade 10.9 extended wheel studs, 50 mm thread length and M12×1.5 pitch, supplied as a 10-piece gold set for front and rear fitment on the 2004-2006 Scion xA
- ColorGold
- Commercial/ResidentialResidential
- Extended thread length 50 mm secures thicker wheel spacers
- Grade 10.9 alloy delivers high tensile strength for track use
- Knurl diameter 14.22 mm matches factory hub bores precisely
- M12 x 1.5 thread fits Scion xA 2004-2006 front and rear
- Ten studs per pack covers both axles in one purchase
Scion xA 2004-2006 wheel studs
These gold 10.9 grade studs replace the original M12x1.5 fasteners on 2004 to 2006 Scion xA models. The 50 mm thread length and 14.22 mm knurl fit both front and rear hubs. A set includes ten pieces for a complete vehicle.
Builders changing wheel bolt patterns
Mechanics performing disc-brake swaps or fitting aftermarket rotors that require longer studs will find the correct length and knurl here. Owners keeping stock wheels and original brake hardware do not need the extra thread engagement.
50 mm thread length decides fit
The 50 mm thread is the critical dimension; it must match the combined thickness of your hub, rotor, spacer and wheel centre. Verify that measurement before ordering because the knurl diameter and thread pitch are fixed.
Highlights
- Extended thread length 50 mm secures thicker wheel spacers
- Grade 10.9 alloy delivers high tensile strength for track use
- Knurl diameter 14.22 mm matches factory hub bores precisely
- M12 x 1.5 thread fits Scion xA 2004-2006 front and rear
- Ten studs per pack covers both axles in one purchase
Specifications
| Brand | v-project |
|---|---|
| Color | Gold |
| Commercial/Residential | Residential |
Questions about this item
Should I pick the 50 mm length or a shorter stud for my 2005 Scion xA?
The 50 mm thread length is the size specified for the 2004-2006 xA front and rear hubs, so choose this version to match the factory mounting depth.
What does the 10.9 grade tell me once the studs are installed on the car?
Grade 10.9 means the studs meet a high tensile-strength rating suitable for the clamping loads seen on Toyota and Scion hubs from 2004 through 2016.
Will the M12 × 1.5 thread and 14.22 mm knurl fit the stock hub bores without modification?
Yes, the M12 × 1.5 thread pitch and 14.22 mm knurl diameter match the original hub bore dimensions used across the listed Toyota and Scion models from 2004 to 2015.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
