We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold threaded wheel studs with knurled bases laid flat

V-Project Inc

V-Project Inc 50mm Extended Wheel Stud M12x1.25 10pcs Gold Subaru WRX GD GG Sedan Sportwagon 2001-2007

SKU CH-J4R7-98DZP

Gold 50 mm extended wheel studs, M12×1.25 thread, grade 10.9 strength, 14.3 mm knurl, ten-piece set for Subaru WRX GD/GG 2001-2007

  • ColorGold
  • Commercial/ResidentialResidential
  • Grade 10.9 strength handles high clamping loads
  • 50 mm thread length fits spacer and thick-hub installs
  • 3 mm knurl seats securely in OE hub bores
  • M12×1.25 thread matches Subaru WRX GD/GG specification
  • Pack of 10 covers all four corners with two spares

Extended Wheel Studs M12x1.25

These 50 mm extended wheel studs fit Subaru WRX GD and GG sedan and sportwagon models from 2001 to 2007. The set includes ten gold-coloured grade 10.9 pin bolts with a 14.3 mm knurl diameter. They are designed for front and rear hubs requiring longer thread engagement.

Replaces Factory Length Studs

The 50 mm thread length replaces shorter original equipment studs when spacers or thicker rotors reduce clamp load. The upgrade is worth it whenever the factory studs no longer protrude enough through the wheel to achieve full nut engagement. Grade 10.9 strength matches or exceeds typical OEM hardware for these applications.

Suits Subaru WRX GD GG Owners Using Spacers

This kit suits owners of 2001 to 2007 Subaru WRX sedan and sportwagon models who run wheel spacers or aftermarket wheels needing extra thread reach. Builders working on other Subaru chassis or different bolt patterns should look elsewhere, as the M12x1.25 thread and knurl dimensions are specific to the listed GD and GG hubs.

Highlights

  • Grade 10.9 strength handles high clamping loads
  • 50 mm thread length fits spacer and thick-hub installs
  • 3 mm knurl seats securely in OE hub bores
  • M12×1.25 thread matches Subaru WRX GD/GG specification
  • Pack of 10 covers all four corners with two spares

Specifications

Brandv-project
ColorGold
Commercial/ResidentialResidential

Questions about this item

Will the 14.3 mm knurl on these M12x1.25 studs fit my Subaru WRX GD hub?

The knurl diameter is 14.3 mm (0.565 inch). Verify your hub bore matches this dimension before installation.

What is the correct press-in method for the 50 mm thread length studs?

Press the studs straight into the hub using a proper press tool; do not hammer them, as impact can damage the 10.9 grade threads.

When should I replace the gold-finished studs in my wheel setup?

Inspect the M12x1.25 threads and 14.3 mm knurl at every wheel change; replace any stud showing stretch, corrosion or damaged knurl engagement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.