We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel cam and groove coupler with threaded end

Usa Sealing

Usa Sealing Cam and Groove Fitting 304SS D 2" Coupler x 2

SKU CH-6AGH-FG6EZ

A 2-inch stainless-steel cam-and-groove socket with NPT threads, nitrile gasket, and 250 psi rating at 70 °F

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • 304 stainless steel body resists corrosion
  • Type D coupler connects 2 in FNPT thread
  • 250 psi working pressure at 70 °F
  • Nitrile gasket seals hose and pipe joints
  • 76 mm overall length fits compact installations

Industrial Cam-and-Groove Coupling

This USA INDUSTRIALS Type D socket connects 2-inch NPT pipework using a cam-and-groove mechanism. The body is manufactured from 304 stainless steel for corrosion resistance in fluid-transfer applications. It features a nitrile gasket rated for a maximum working pressure of 250 psi at 70 F. The overall length measures 76 mm.

Suited for NPT fluid systems

Installers requiring a quick-disconnect socket for 2-inch female NPT threads with a 2-inch hose barb will find this fitting matches the specification. It is not intended for systems using different thread standards, alternative gasket materials, or pressure ratings above the stated limit. Buyers needing an integrated locking arm should select a different model.

250 psi at 70 F pressure rating

This single figure defines the safe operating envelope for the assembly at the reference temperature. Exceeding this pressure risks gasket failure or coupling separation. The 304 stainless construction and nitrile seal determine chemical compatibility alongside the pressure limit. Verify that your system design stays within this rating before installation.

Highlights

  • 304 stainless steel body resists corrosion
  • Type D coupler connects 2 in FNPT thread
  • 250 psi working pressure at 70 °F
  • Nitrile gasket seals hose and pipe joints
  • 76 mm overall length fits compact installations

Specifications

BrandUSA INDUSTRIALS
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

Will my existing 2" NPT male threads seal against this 2" -11-1/2 FNPT socket?

Yes, the socket uses standard 2" -11-1/2 NPT threads that match any compatible male NPT fitting.

Can this 304 stainless steel coupler handle the same 250 psi at 70 F as my older brass cam-lock fittings?

It is rated for 250 psi maximum working pressure at 70 F, so it meets or exceeds that pressure level.

How do I confirm the Nitrile gasket is seated correctly after I lock the arms?

Check that the gasket sits flush inside the 2 1/2 in socket bore and that both cam arms close fully without binding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.